Samsung Ubigate iBG3026 Configuration Manual page 190

CHAPTER 18. MPLS
Configuring R1 (NSM)
Router#configure terminal
Router/configure# interface ethernet 1/0
Router/configure/interface/ethernet(1/0)# ip address
10.10.10.1 24
Router/configure/interface/ethernet(1/0)# label-switching
Router/configure/interface/ethernet(1/0)# exit
Router/configure# interface loopback lo1
configuring new loopback interface
lo1=======>
Router/configure/interface/loopback lo1# ip address
192.168.1.1 255.255.255.0
Router/configure/interface/loopback lo1# exit
R1 (LDP)
Router/configure# router-id 192.168.0.1
Router/configure# router ldp
Router/configure/router/ldp# transport-address 192.168.0.1
Router/configure/router/ldp# exit
Router/configure# interface ethernet(1/1)
Router/configure/interface/ethernet(1/1)# enable-ldp
Router/configure/interface/ethernet(1/1)# exit
R1 (OSPF)
Router/configure# router ospf 100
Router/configure/router/ospf# network 10.10.10.0 0.0.0.255
area 0
Router/configure/router/ospf# network 192.168.0.1 0.0.0.0
area 0
Router/configure/router/ospf# exit
R2 (NSM)
Router/configure# interface loopback lo1
configuring new loopback interface
lo1 =======>
Router/configure/interface/loopback lo1# ip address
192.168.0.2 32
Router/configure/interface/loopback lo1# exit
Router/configure# interface ethernet 1/2
Router/configure/interface/ethernet (1/2)# ip address
10.10.10.2 24
152
© SAMSUNG Electronics Co., Ltd.