Samsung Ubigate iBG3026 Configuration Manual page 662

CHAPTER 34. Extended VoIP Services
Configuring Services
Ubigate iBG3026 does not require a user to set up separately for services of
survivable telephony mode. In the Call Manager Interworking mode, it
controls services on the basis of subscriber profiles downloaded from Call
Manager. But, same as in Call Manager Interworking mode, for CLID Service
enable the function that transfers a Caller Id to a FXS phone in FXS voice-port.
How to Configure Voice-Port for CLID
To enable the Caller Id function in FXS voice-port follow the below procedures.
Configuration Steps
configure terminal
−
voice-port
−
caller-id enable
−
exit
−
Detailed Steps
Step
1
2
3
4
620
Command
configure terminal
Example)
# configure terminal
voice-port slot/subslot/port
Example)
/configure# voice-port 0/1/2
[no] caller-id enable [type1 | type2]
Example)
/configure/voice-port(0/1/2)# caller-id
enable type1
Exit
Example)
/configure/voice-port(0/1/2)# exit
Purpose
Enters global configuration
mode.
Enters Voice-Port
configuration mode.
Enables or Disables caller-id
feature.
Exits the current mode
© SAMSUNG Electronics Co., Ltd.