Samsung Ubigate iBG3026 Configuration Manual page 530

CHAPTER 30. Analog Voice Port
Step
16
17
18
488
Command
port slot/subslot/port
exit
Purpose
- The period (.) acts as a wildcard character.
When the timer (T) character is included at the
end of the destination pattern, the router
collects dialed digits until the interdigit timer
expires(5 seconds, by default) or until you dial
the termination character(the default is #).
The timer character must be a capital T.
Maps the dial peer to a specific Port Number
Exits voice dial-peer configuration mode
(Continued)
© SAMSUNG Electronics Co., Ltd.