Samsung Ubigate iBG3026 Configuration Manual page 483

Detailed Steps
Step
1 configure terminal
Example)
# configure terminal
2 voice class codec tag
Example)
/configure# voice class codec
100
3 codec-preference value
{g711alaw|g711ulaw|g723r53|g
723r63| g729} [interval-time]
Example)
/configure/voice/class/codec
100#codec-preference 1
g711alaw 20
4 exit
Example)
/configure/voice/class/codec
100# exit
5 dial-peer voice voip tag
Example)
/configure#dial-peer voice voip
1000
6 voice-class codec tag
Example)
/configure/dial-peer/voice/voip
1000#voice-class codec 100
© SAMSUNG Electronics Co., Ltd.
Command
Ubigate iBG3026 Configuration Guide/Ed.00
Purpose
Enters global configuration mode.
Enters voice-class configuration mode and
assigns an identification tag number for a
codec voice class. The tag argument is
the unique number assigned to the voice
class.
Range: 1 to 10000.
Adds codecs to the prioritized list of
codecs. Keyword and arguments are as
follows:
- value:Order of preference, with 1 being
the most preferred and 5 being the least
preferred.
- codec-type:Type of codec referred.
- interval-time:10/20/30/40/50/60(ms)
Repeat this command to specify the
preferred selection order for additional
codecs, if required.
Exits the current mode
Enters dial-peer configuration mode for
the VoIP peer designated by tag
Assigns a previously configured codec
selection preference list(codec voice
class) to the VoIP dial peer designated by
tag.
Range: 1 to 10000.
Maps to the tag number created
using the 'voice class codec' command.
441