Maintenance And Tune-Up Specifications - Yamaha V star 1100 Owner's Manual

LUBRICATION, MAINTENANCE AND TUNE-UP
Table 4 RECOMMENDED LUBRICANTS AND FLUIDS (continued)
Engine oil
API classification
Viscosity
5° C (40° F) or above
15° C (60° F) or below
Capacity
Oil change only
Oil and filter change
When engine completely dry
Final gear oil
Viscosity
Single grade
Multigrade
Grade
Capacity
Brake fluid
Battery
Fork oil
Viscosity
Capacity per leg
Oil level
Measured from top of the fully compressed
Fork tube with the fork spring removed
Table 5 MAINTENANCE AND TUNE-UP SPECIFICATIONS
Item
Recommended spark plug
Spark plug gap
Idle Speed
Pilot screw (Europe and Australia models)
Valve clearance
Intake
Exhaust
Compression pressure (at sea level)
Standard
Minimum
Maximum
Ignition timing
Vacuum pressure (at idle)
Front brake pad wear limit
Rear brake pad wear limit
Brake pedal height
XVS1100 models (above footpeg)
XVS1100A models (above floorboard)
Throttle cable free play (at the flange)
Brake free play (at lever end)
Clutch cable free play (at lever end)
Shift rod length
XVS1100 models
XVS1100A models
Rim runout service limit
Radial
Axial
SE, SF or SG
SAE 20W40
SAE 10W30
3.0 L (3.2 U.S. qt. [2.6 Imp. qt.])
3.1 L (3.3 U.S. qt. [2.7 Imp. qt.])
3.6 L (3.8 U.S. qt. [3.2 Imp. qt.])
SAE 80 hypoid gear oil
SAE 80W-90 hypoid gear oil
API GL-4, GL-5 or GL-6
200 cc (6.8 U.S. oz. [7.0 Imp. oz.])
DOT 4
Maintenance free
SAE 10W fork oil
464 cc (15.7 U.S. oz [16.3 Imp. oz.])
108 mm (4.25 in.)
Specification
NGK BPR7ES, Denso W22EPR-U
0.7-0.8 mm (0.028-0.031 in.)
950-1050 rpm
3 turns out
0.07-0.12 mm (0.0028-0.0047 in.)
0.12-0.17 mm (0.0047-0.0067 in.)
2
1000 kPa (142 psi [10 kg/cm ])
2
900 kPa (128 psi [9 kg/cm ])
2
1100 kPa (156 psi [11 kg/cm ])
10° BTDC @ 1000 rpm
34.7-37.3 kPa (260-289 mm Hg [10.2-11.4 in. Hg])
0.8 mm (0.03 in.)
0.5 mm (0.020 in.)
81.8 mm (3.22 in.)
98.5 mm (3.88 in.)
4-6 mm (0.16-0.24 in.)
5-8 mm (0.20-0.31 in.)
5-10 mm (0.20-0.39 in.)
114.7 mm (4.52 in.)
114.9 mm (4.53 in.)
1.0 mm (0.04 in.)
0.5 mm (0.02 in.)
85
3