AIR/FUEL, EXHAUST AND EMISSION CONTROL SYSTEMS
45
46
47
48
49
50
51
11. Remove the carburetor heater (A, Figure 48)
and its washer from the bottom of the carburetor
body. When servicing the rear carburetor, also re-
move the heater ground terminal (B, Figure 48).
12. Remove the mounting screws (A, Figure 49)
and lift the float bowl (B) from the carburetor body.
Watch for the float bowl O-ring (Figure 50).
13. Remove the screw (A, Figure 51), and pull the
float pin (B) from the float.
14. Lift out the float and float valve (A, Figure 52).
217
8