License Plate Lamp; Replacement Bulbs - Pontiac Montana SV6 2007 Owner's Manual

License Plate Lamp

To replace one of these bulbs, do the following:
1. Remove the two screws holding each of
the license plate lamps to the fascia.
2. Turn and pull the license plate lamp forward
through the fascia opening.
3. Turn the bulb socket counterclockwise and
pull the bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the
license plate lamp.

Replacement Bulbs

Exterior Lamp
Back-up
Front Turn Signal, DRL and
Parking
High-Beam and Low-Beam
Headlamps
License Plate Lamp
Sidemarker
Stoplamp, Taillamp and Turn
Signal
For replacement bulbs not listed here, contact
your dealer.
Bulb Number
3057KX
3157NAK
H11
168
194
3057KX
457