Vlan Setting Example; Two Separate 802.1Q Vlans - Planet GS-5220 User Manual

4.3.3.8 VLAN setting example:


Separate VLAN

802.1Q VLAN Trunk

Port Isolate

4.3.3.8.1 Two Separate 802.1Q VLANs

The diagram shows how the Managed Switch handle Tagged and Untagged traffic flow for two VLANs. VLAN Group 2 and
VLAN Group 3 are separated VLAN. Each VLAN isolate network traffic so only members of the VLAN receive traffic from the
same VLAN members. The screen in
Switches.
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario is described as follows:

1.
Figure 4-3-3-8 appears and
Figure 4-3-3-8: Two Separate VLANs Diagram
VID Untagged Members
1
2
3
Table 4-3-3-2: VLAN and Port Configuration
Untagged packet entering VLAN 2
While [PC-1] transmit an untagged packet enters Port-1, the Managed Switch will tag it with a
VLAN Tag=2. [PC-2] and [PC-3] will received the packet through Port-2 and Port-3.
User's Manual of GS-5220 PoE Series Managed Switch
Table 4-3-3-2 describes the port configuration of the Managed
Port-7 ~ Port-28
Port-1,Port-2
Port-4,Port-5
149
Tagged Members
N/A
Port-3
Port-6