Table of Contents
Advertisement
4.5.3 VLAN setting example:
4.5.3.1 Two separate 802.1Q VLAN
The diagram shows how the Industrial PoE Switch handle Tagged and Untagged traffic flow for two VLANs. VLAN Group
2 and VLAN Group 3 are separated VLAN. Each VLAN isolate network traffic so only members of the VLAN receive traffic
from the same VLAN members. As shown in
Switch.
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario described as follow:
Untagged packet entering VLAN 2
While [PC-1] transmit an untagged packet enters Port-1, the switch will tag it with a VLAN Tag=2. [PC-2] will
1.
received the packet through Port-2.
[PC-3] and [PC-4] received no packet.
2.
While the packet leaves Port-2, it will keep as a tagged packet with VLAN Tag=2.
3.
Figure 4-31
and
Table 4-13
Figure 4-31 two separate VLAN diagram
VID
Untagged Members
1
Port-5
2
Port-1,Port-2
3
Port-3,Port-4
Table 4-13 VLAN and Port Configuration
-56 -
describes the port configuration of Industrial PoE
Tagged Members
N/A
Port-2
Port-4
User's Manual
Advertisement
Table of Contents
