Table of Contents
Advertisement
11.2 Command Line Interface (CLI) Pages
Chapter 5. FRONT PANEL OPERATION
Chapter 10. TRANSEC MODULE HTTPS INTERFACE
11.2.1
CLI Menu System – Parallel Functionality
The CLI, accessible via SSH, allows the user to change operating parameters in a manner similar
to the functionality, as provided, for the monitoring, configuration, and control via the SLM-5650B
Satellite Modem's front panel menus (see Chapter 5. FRONT PANEL OPERATION) and the
TRANSEC Module HTTPS Interface (see Chapter 10. TRANSEC MODULE HTTPS
INTERFACE).
11.2.2
CLI Menu – Common Information, Navigation, Operation Features
With some exceptions, the menu pages depicted in this chapter feature the following information
or navigational aids:
Menu Options/Fields
[Text field example]
Logout of Administration Session
Exit Menu
Typically, once any mnemonic is entered, the user is prompted to type in a functional selection,
an alphanumeric configuration string, or an operational value. This prompt is provided at the
bottom of the active page and takes the form of a selection choice and/or a blank prompt (a solid
bar), as shown in the example to the right:
TRANSEC Module SSH CLI Operation
Entry
[RO]
Typically found in the body of the page. This designates the field as
a read-only status/informational message. There is no user action
required for this item.
L
Found at the bottom of the page. Allows user to log out of the SSH
session.
X
Found at the bottom of the page. Allows user to exit the current
menu and return to the parent menu. Alternately, the user may
press the Esc key to perform the same action.
11–3
SLM-5650B Satellite Modem
Description
MN-SLM-5650B
Revision 2
Advertisement
Table of Contents
