Chapter 5: Configuring The G250; Configuring Basic Gateway Connectivity - Avaya G250 Installing And Upgrading

Chapter 5: Configuring the G250

The G250 requires software configuration. The G250 can be configured using:
The Avaya Installation Wizard (Avaya IW). Avaya IW is a wizard that prompts you for all
●
configurations required to complete the installation of the G250. Avaya IW is used only to
configure a G250 with an S8300. Refer to
Wizard (Avaya IW)
The Gateway Installation Wizard (GIW). The GIW is a wizard that prompts you for all
●
configurations required to complete the installation of the G250. You can run GIW to
configure a G250 without an S8300. Refer to
Installation Wizard (GIW)
The Avaya G250 Command Line Interface. The CLI is a comprehensive tool for
●
configuring the gateway and includes all supported configuration tasks. For information
about configuration using the CLI, see Administration for the Avaya G250 and Avaya G350
Media Gateways, 03-300436. For detailed information on CLI commands, refer to the
Avaya G250 and Avaya G350 CLI Reference, 03-300437.
The G250 can be accessed:
At the customer site via a laptop connected to the of the G250.
●
From a remote location via a modem. For information about connecting and enabling a
●
modem, refer to
page 49.
Remotely through the network. For information about preparing a newly installed G250 for
●
configuration via the network, refer to

Configuring basic gateway connectivity

You can run an installation script on a newly installed gateway to configure the basic network
parameters required to achieve network connectivity. A remote technician can then further
configure the gateway as required. Note that the installation script does not require running any
CLI command.
Note:
The installation script is supported from branch gateway firmware version 29.22.x.
Note:
1. At the prompt, enter username root and password root.
2. At the prompt, configure a new password.
on page 129.
on page 123.
Chapter 4: Connecting and enabling a modem for remote access
Appendix D: Running the Avaya Installation
Appendix C: Running the Gateway
Configuring basic gateway connectivity on page 57.
Issue 6 November 2009
on
57