Safety Precautions - SATO SG112-ex Operator's Manual

Before You Start

Safety Precautions

This topic describes how to use the product safely. Be sure to read the following information carefully before
using the product.
Pictographic Symbols
This operator manual and the product labels use a variety of pictographic symbols. These symbols emphasize
the safe and correct use of the product and to prevent injury to others and property damage. The explanation
of the symbols is as follows. Be sure to understand these symbols well before you read the main text.
The Warning symbol indicates that
you can cause death or serious
injury if you do not follow the
instruction or procedure.
Warning
Example Pictographs
The pictograph means "Caution is required". A specific warning symbol is
contained inside this pictograph (The left symbol is for electric shock).
The pictograph means "Must not be done". What is specifically prohibited is
contained in or near the pictograph (The left symbol means "Disassembly
prohibited").
The pictograph means "Must be done". What is specifically to be done is
contained in the pictograph (The left symbol means "Unplug the power cord from
the outlet").
Do not use the voltage other than specified
• Do not use the power supply voltage
other than the one specified. Doing so
could result in a fire or electric shock.
Do not use in hazardous locations
• The product is not explosion proof
certified.
• Do not use in a potentially explosive
environment or atmosphere. Doing so
could result in a fire or explosion.
Do not set on an unstable area
• Do not set the product on an unstable
area, such as a wobbly table or slanted
area or on an area subject to strong
vibration. The product could fall or topple
over, possibly resulting in injury.
8
SG112-ex Operator Manual
The Caution symbol indicates that
you can cause injury or property
damage if you do not follow the
Caution
instruction or procedure.
Warning
When the product is dropped or breaks
• If the product is dropped or breaks,
immediately power it off, unplug the
power cord from the outlet, and contact
your SATO reseller or technical support.
Using the product in one of these
conditions could result in a fire or electric
shock.