Charging The Battery Pack; Charging By Installing The Battery Pack In The Battery Charger (Optional) - SATO TH208 Quick Manual

CHARGING THE BATTERY PACK

CHARGING BY INSTALLING THE BATTERY PACK IN THE BATTERY CHARGER (OP-
TIONAL)
Install the battery pack in the battery charger (optional) and charge it.
Connect the power cord from the AC adapter to the charger unit. Then, connect the power cord to the AC
1.
adapter and plug it to the outlet.
GY412 Quick Guide
WARNING
• The optional battery charger set provided for this printer is
specific to this printer. Do not use it for other electrical
equipment.
Section 2: Preparing for First-Time Operation
Page 2-1