8
Appendix
8.1 List of Initial Values
The initial value refers to the setting value of the printer when it was shipped from the factory.
If you reset the printer in default setting mode, the setting values of the printer will change back to the
factory default values. The tables below show the initial value of each setting item and the type of reset
that changes the value back to the initial value.
CAUTION
It is generally not necessary to perform the initialization. Doing so will remove all the customer settings.
8.1.1
Normal Mode
Setting Item
ADJUSTMENT MODE
PITCH POSITION
OFFSET POSITION
DARKNESS
VOLUME LEVEL
LCD Brightness
8.1.2
User Mode
Setting Item
PRINT SPEED
PRINT DARKNESS
PITCH OFFSET
CHARACTER CODE
2 BYTE FONTS
2 BYTE FONTS
NOTIFICATION FUNCTION SETTING
NOTICE FUNCTION
Initial Value
Varied
Varied
50
2
Midrange
Initial Value
S84-ex
8 dots/mm:
06 IPS
12 dots/mm: 06 IPS
24 dots/mm: 03 IPS
S86-ex
8 dots/mm:
06 IPS
12 dots/mm: 06 IPS
06
+0.00 mm
UTF-8
GB18030
MINCHO
NO
CLEAN PRINTER
Default
Default
(Shipping)
(User)
No
No
No
No
Yes
No
Yes
Yes
Yes
No
Default
Default
(Shipping)
(User)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
S84-ex/S86-ex Operator Manual
291