Hex Dump Mode - SATO SG112-ex Operator's Manual

4.2.9

Hex Dump Mode

The hex dump mode allows you to print the contents of the receive buffer in a hexadecimal format to
allow the data stream to be examined for errors and troubleshooting.
The flowchart shows the sequence of the setting screens for the hex dump mode. The table describes
each setting screen in detail.
CANCEL button
Return to HEX DUMP MODE menu.
SELECT DUMP DATA
Select the data for printing the hex dump.
• RECEIVE DATA: Print the hex dump of the received data.
• RECEIVE BUFFER: Print the hex dump of the received print data (one
item).
• INTERNAL DATA: Print the setting values of the internal buffer.
Note
RECEIVE BUFFER cannot be selected if there is no received data.
* Press the
accordingly. The active arrow icons are shown on the screen.
* Pressing the FUNCTION button on each screen will revert to the
HEX DUMP MODE menu.
ENTER button
Select RECEIVE BUFFER + ENTER button/
INTERNAL DATA + ENTER button
Select RECEIVE DATA + ENTER button
LINE button
Data reception
HEX dump print
ENTER button
4 Operation and Configuration
, , or button to select an item or set the value
icon is displayed when
RECEIVE BUFFER is selected.
icon is displayed when
INTERNAL DATA is selected.
LINE button
HEX dump print
After issuing the media
For internal buffer Hex dump
printing and internal buffer data
printing, the screen automatically
changes to normal mode after
issuing the media.
SG112-ex Operator Manual
125