Concluding Steps; Removing The Front Vga Connector; Preliminary Steps; Removing The Front Panel Module - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

13.3.1.6 Concluding steps

Perform the following procedures:
"Installing the fan box" on page 156
Ê
"Reassembling" on page 61
Ê
"Connecting the server to the power source" on page 66
Ê
"Switching on the server" on page 67
Ê
"Enabling BitLocker functionality" on page 92
Ê

13.3.2 Removing the front VGA connector

Field Replaceable Unit
(FRU)
Tools: Socket screw driver (5 mm)
hexagon SW5

13.3.2.1 Preliminary steps

"Disabling or suspending BitLocker functionality" on page 69
Ê
"Locating the defective server" on page 51
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 55
Ê
"Removing the fan box" on page 154
Ê

13.3.2.2 Removing the front panel module

"Removing the front panel module" on page 333
Ê
RX2540 M1
Front panel and external front connectors
Upgrade and Maintenance Manual
Hardware: 10 minutes
347