Removing Expansion Cards; Preliminary Steps - Fujitsu PRIMERGY CX2550 M2 Upgrade And Maintenance Manual

Expansion cards
"Controls and indicators on the server node" on page 51
Ê
"Updating RAID controller firmware" on page 67
Ê
"After replacing / upgrading LAN controllers" on page 83
Ê
6.3.2

Removing expansion cards

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
6.3.2.1

Preliminary steps

Perform the following procedures:
Ê Locate the desired server node with the ID button.
"Shutting down the server node" on page 39
Ê
Ê Remove all external cables from the server node.
"Removing the server node from the server enclosure" on page 40
Ê
"Removing the riser module" on page 41
Ê
110 Upgrade and Maintenance Manual
(if applicable)
(if applicable)
Hardware: 5 minutes
CX2550 M2