Removing Expansion Cards - Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual

Concluding steps
▶
"Reassembling" on page
▶ If applicable, connect external cables to the expansion card.
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Updating expansion card firmware" on page
▶
"Resuming BitLocker functionality" on page
▶
"After replacing or upgrading LAN controllers" on page
9.5.2

Removing expansion cards

Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH2 / (+) No. 2 screw driver (only for removing the slot
bracket)
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ If applicable, disconnect external cables from the expansion card.
▶
"Getting access to the component" on page
Removing the expansion card
▶ If applicable, remove SFP+ transceiver modules from the expansion card,
see "Removing SFP+ transceiver modules" on page
▶ If a RAID controller is installed, disconnect the HDD LED cable from the
system board.
TX1320 M5
Expansion cards and backup units
54.
57.
60.
45.
Upgrade and Maintenance Manual
79.
91.
98.
Hardware: 5 minutes
71.
46.
48.
192.
203