All Count Reset - Konica Minolta 7165 Instruction Manual

7155e131v1.fm 20 ページ ２００１年１１月２７日 火曜日 午後４時５４分
[4] E.K.C. (Electronic Key Counter) Function Setting (continued)
[2] E.K.C. All Count Reset
Reset the count for all EKC accounts.
EKC Setting Menu Screen
Procedure
1 Touch [4] E.K.C. function setting on the Key Operator Mode Screen. Enter an
8-digit EKC master key code, then touch OK to display the EKC Setting Menu
Screen.
2 Touch [2] E.K.C. all count reset . The EKC All Count Reset Screen will be
displayed.
3 Touch YES to reset all counters to zero and to return to the EKC Setting Menu
Screen.
Or, touch NO to cancel. Touching RETURN will also cancel this function and
return to the EKC Setting Menu Screen.
4 If other EKC setting changes are required, touch desired key, from [1]~[3].
5 Touch RETURN to restore the Key Operator Mode Screen.
6 If no further changes are required, touch RETURN to restore the Basic Screen
to perform copying operations.
13-20
NOTE:
If an invalid EKC master key code is entered, continue by entering the
valid 8-digit code.
EKC All Count Reset Screen