Tray Auto Select Setting; T Ray Auto Select Setting; Job Memory; Memory Switch - Konica Minolta 7165 Instruction Manual

[11] Tray Auto Select Setting

Select to be detected or not to be detected, and priority of detection for each tray
when ATS/APS functions.
Key Operator Mode Screen 1
Procedure
1 Touch [11] Tray auto select setting on the Key Operator Mode Screen to
display the Tray Auto Select Setting Screen.
2 On the left half of the screen, touch to highlight each tray key, then select OFF
or ON to specify whether the selected tray is to be automatically detected or not
when ATS/APS functions.
3 Tray keys specified as ATS/APS ON will appear on the right half of the screen.
Touch to highlight the desired tray key, then change its priority by using Up ( ▲ )
and Down ( ▼ ) arrow keys.
4 Touch OK to complete the setting and restore the Key Operator Mode Screen.
5 If no further changes are required, touch RETURN to restore the Basic Screen
to perform copying operations.
Key Operator Mode Screen 2
Tray Auto Select Setting Screen
Key Operator
Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.K.C.
Lock/Delete

Job Memory

Paper Type/
Special Size
Panel Contrast/
Key Sound
Key Operator
Data Setting
Weekly
Timer
Control Panel
Adjustment
Tray Auto
Select Setting
Power Save
Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Centre
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Scan
Transmission
Non-Image
Area Erase
13
Key Operator
Mode
13-37