To Set Next Copying Job (Reserve) - Konica Minolta 7165 Instruction Manual

To Set Next Copying Job (Reserve)

The Reserve function allows you to set up a new job while a current (scan/
print) job is in process. When the current job is finished, the Reserve job
starts printing immediately.
>>>Specifications for Reserve<<<
❒ Job settings: Max. 5 (current job plus 4 reserve jobs)
❒ When the current job is under Store mode, Image Insert, or Dual Page, the
reserve job setting will be available after the copier starts to print the current
job.
❒ Incompatible Conditions: Interrupt copying, Scanning in Store mode, Proof
copy, Storing image in Overlay Memory
1.
Press [ START ] to start scanning/printing for the current job.
FREE JOB will become active to show that the reserve job setting is now available.
2.
Touch FREE JOB to highlight it.
The Reserve Job Setting Screen will be displayed.
On the Reserve Job Setting Screen, all keys on the LCD and control panel
will function for the reserve job.
3.
Select copy conditions for the reserve job, as desired.
When trouble occurs while setting the reserve job, the PRINT or SCAN
JOB key on the Basic Screen will change to JAM or ADD PAPER key.
See p. 5-8 to p. 5-10.
Copying Using Memory (continued)
HINT
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1s1, 2s2
2s1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
FS-110/210
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-35