How To Access The Ekc Setting Mode - Konica Minolta 7165 Instruction Manual

7155e131v1.fm 16 ページ ２００１年１１月２７日 火曜日 午後４時５４分
[4] E.K.C. (Electronic Key Counter) Function Setting (continued)

How to Access the EKC Setting Mode

Key Operator Mode Screen
Procedure
1 Touch [4] E.K.C. function setting on the Key Operator Mode Screen. The EKC
Master Key Code Screen displays, if a code is required.
2 Use the keypad on the touch screen to enter your 8-digit EKC master key code,
then touch OK to display the EKC Setting Menu Screen. (See note.)
3 Select the desired EKC function, and make settings, as required.
To exit the EKC mode, touch RETURN on the EKC Setting Menu Screen.
4 To exit the Key Operator mode, touch RETURN on the Key Operator Mode
Screen to restore the Basic Screen.
13-16
NOTE:
If an invalid EKC master key code is entered, continue by entering the
valid 8-digit code. The EKC master key code can be set to less than 8
digits by the Memory switch setting of the Key Operator function.
EKC Master Key Code Screen
EKC Setting Menu Screen