Konica Minolta 7165 Instruction Manual page 115

FOR DETAILS
For particular jobs in progress, copying will cease only after certain
phases of the immediate operation are completed, as indicated by the
[INTERRUPT] LED conditions described below.
• Collectively printing image stored in memory
The LED blinks until one set of the current job is printed.
Then the LED remains steady for the temporary job performed in
Interrupt mode.
• Scanning originals into memory
The LED blinks until scanning is completed for all originals placed in
the document feeder.
Then, the LED remains steady for the temporary job performed in
Interrupt mode.
• Scanning originals into memory while printing in Reserve mode
The LED blinks until the copier completes the current printing job,
scans all originals placed on the document feeder, and prints one set
of the Reserved job.
The LED remains steady for the temporary job performed in Interrupt
mode.
Interrupt Copying (continued)
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1s1, 2s2
2s1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
FS-110/210
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-57