Programmed Shut-Off (Weekly Timer); P Rogrammed Shut-Off (Weekly Timer) - Konica Minolta 7165 Instruction Manual

7155e07v1.fm 2 ページ ２００１年１１月２８日 水曜日 午後５時３３分

Programmed Shut-Off (Weekly Timer)

The Weekly Timer function manages a copier to be turned on and off at the
time specified by the Key Operator to disable copying during off time.
This function is not factory-set.
When a copier is under control of the Weekly Timer function, the TIMER
indicator on the right side of the control panel is lit.
When the TIMER indicator light is on and other indicators are off, copying is
unavailable due to the Weekly Timer function.
However, copying will be available by using the following procedure.
1.
Press [ POWER SAVER ON/OFF ] on the control panel.
The Basic screen will be displayed along with the message shown below.
Timer interrupt mode
Enter password
7-2
INTERRUPT
PROOF COPY
AR QTY. START
Please Be Reminded!
IMPORTANT: WHEN THE TIMER INDICATOR IS LIT, THE COPIER
WILL TURN OFF AUTOMATICALLY. DO NOT TURN IT OFF BY
PRESSING POWER SWITCH.
INTERRUPT
PROOF COPY
AR QTY. START
HINT
For details of the Weekly Timer function, see p. 13-27 to p. 13-35.
FOR DETAILS
The machine power will be turned off automatically after 5 minutes from
this state.
TIMER
POWER SAVER
ON / OFF
STOP
TIMER
POWER SAVER
ON / OFF
STOP