Selecting Magnification Ratio (Lens Mode); S Electing Magnification Ratio (Lens Mode); To Copy In 1.00 Magnification Mode - Konica Minolta 7165 Instruction Manual

7155e031v1.fm 14 ページ ２００１年１１月２８日 水曜日 午前１０時５２分
Selecting Magnification Ratio (Lens Mode)
When the copier is turned ON, the magnification ratio is set to 1.00 (100%)
automatically on the Basic Screen.
Follow each procedure described in this section to select the desired
magnification ratio.
To Copy in 1.00 Magnification Mode
Follow this procedure to make a 100% copy of the original image.
1.
Close the RADF securely, then press [ AUTO RESET ].
The initial settings are restored. Check that APS is highlighted to indicate that
the 1.00 magnification is selected.
2.
Select additional copy conditions, as desired.
3.
Enter the desired print quantity from the control panel keypad.
4.
Position original(s).
5.
Press [ START ].
3-14
HINT
The initial settings may have been altered by Key Operator. See p. 13-10
to p. 13-11.
FOR DETAILS
Specifying paper size will release 1.00 magnification and set AMS
automatically. In this case, touch 1:1 to highlight it again.
HINT
See p. 3-6 for details on setting print quantity.
HINT
See p. 3-2 to p. 3-5 for details on positioning originals.