Konica Minolta 7165 Instruction Manual page 83

Making Double-Sided Copy (1 s s s s 2, 2 s s s s 2) (continued)
Selecting TOP BIND will make copies upside down on the reverse side,
while RIGHT&LEFT BIND copies normally.
Touch OK to return to the Basic Screen.
3.
Position original FACE DOWN on the platen glass according to the
original direction specified in step 1 .
Be sure to start from the first page.
• See p. 11-7 for paper sizes detectable on the platen glass.
• See p. 3-5 for details on positioning originals.
4.
Touch 1 s s s s 2 on the Basic Screen to highlight it.
The STORE key will be automatically highlighted on the screen.
DO NOT press [ AUTO RESET ] at this point, otherwise the platen mode
will be released to disable the copier from scanning the original placed
on the platen glass.
5.
Select additional copy conditions, as desired.
Some incompatible conditions may automatically release the selected
copy mode. In this case, arrange all the settings to be compatible with
the selected copy mode.
6.
Enter the desired print quantity from the control panel keypad.
See p. 3-6 for details on setting print quantity.
FOR DETAILS
HINTS
Please Be Reminded!
FOR DETAILS
HINT
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1s1, 2s2
2s1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
FS-110/210
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-25