To Display Application Selection Screen; T O Display Application Selection Screen - Konica Minolta 7165 Instruction Manual

7155e091v1.fm 2 ページ ２００１年１１月２８日 水曜日 午前１１時３１分

To Display Application Selection Screen

Follow the procedure below to display the Application Selection Screen and
select the desired copying features.
1.
Touch APPLICATION on the Basic Screen.
The Application Selection Screen will be displayed on the touch panel.
To restore the original copying conditions, touch CANCEL .
To clear all Application settings, touch ALL CLEAR .
2.
Touch OK on the Application Selection Screen.
Selections will be completed and the Basic Screen will be restored.
9-2
FOR DETAILS
• When a function key is touched, it becomes highlighted. If you touch a
function key, another screen or two will display to enable you to enter
the appropriate settings.
• Check BOOK MARK in the message area of the subsequent screen,
if desired, so that the screen may be directly accessed from the
Check Screen to change the setting you made.
• If one function on the menu is incompatible with another, it will appear
dimmed.
• The APPLICATION key on the Basic Screen will be highlighted when
application selections have been made.
Please Be Reminded!
With the Basic Screen displayed, you can press [ START ] to perform the
operation.