Konica Minolta 7165 Instruction Manual page 112

7155e033v1.fm 54 ページ ２００１年１１月２８日 水曜日 午前１１時１５分
Checking Feature Selections and Proof Copying (continued)
7.
Change the print quantity, as required.
8.
Press [ START ].
If the print quantity is not changed, the copier will output the rest, except the
sample sets.
3-54
FOR DETAILS
Proof copy can be performed as needed, until the print quantity amount
on the Basic Screen reaches zero. (Note that the print quantity amount
on the Check Screen does not change.)
If required, change the print quantity on the Basic Screen.
CAUTION
When the finisher / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.