All Counter Reset [3] - Konica Minolta 7033 Instruction Manual

Section 11 : Key Operator Mode

All Counter Reset [3]

Reset the count for all EKC password Nos.
Setting options: Reset All Counters yes or no
Key Operator Mode screen
Procedure
1. While pressing HELP button, turn power ON. Enter a 4-digit key operator password,
then touch " OK " to display the Key Operator Mode screen.
Advice
If an invalid key operator password is entered, coutinue by entering the valid 4-digit
password.
2. Touch "
4. E.K.C. " Enter an 8-digit EKC master key code, then touch " OK " to display
the EKC Setting Menu screen.
Advice
If an invalid EKC master key code is entered, continue by entering the valid 8-digit
code.
3. Touch "
3. All counter reset " to display the All Counter Reset screen.
4. Touch "
Yes " to reset all counters to zero.
Or, touch " No " not to reset. The selected key will be highlighted.
5. Touch "
OK " to complete settings and return to the EKC Setting Menu screen.
6. If no further changes are required, proceed to step 9 .
7. If other EKC setting changes are required, touch desired key from
8. If no other EKC settings are required, touch "
Mode screen.
9. Turn power OFF.
10. Turn the copier power switch back ON to perform copying operations.
5. EKC (Electronic Key Counter) [4] (continued)
EKC Setting Menu screen
RETURN " to restore the Key Operator
All Counter Reset screen
[1] ~ [5] .
Key Operator
Mode
11 - 25