Konica Minolta 7165 Instruction Manual page 13

ページ
7155econtv1.fm xi ２００１年１１月２８日 水曜日 午後５時３１分
• Output for FS-110/210 Finisher with PI-110 Cover Sheet Feeder Installed:
Cover Sheet mode
Manual Finishing mode
For details, see Section 7: Advanced Information.
• Overlay
Scans an original image and overlays it on the pages of another document.
For example, you may want to incorporate a page heading, graphic design
or logo into the pages of your document.
• Overlay Memory
Same as for "Overlay" except the overlay image is stored in memory.
• Paper Capacity
Total 2,600 sheets, including two 500-sheet trays, a 1,500 sheet tray, and a
100-sheet Multi-sheet bypass tray.
Total 6,600 sheets, including 4,000-sheet optional large capacity tray.
• Platen Memory
Scans documents into memory from the platen glass and/or the document
feeder and inserts the pages into another document copied from the
document feeder. If an incompatible function is selected in this mode, the
latter function will not be selected, and an Error message will be displayed.
• Power Saver
Automatically turns off all but nominal power supply after a specified period
of copier inactivity, for optimal efficiency. Power is returned after a brief warm
up period by pressing [ POWER SAVER ON/OFF ] on the control panel.
• Program Job
Scans documents into memory while designating different copy conditions
for each original, then prints all the documents collectively.
• Proof Copy
To ensure correct output before running multiple copies, run a proof copy by
pressing [ PROOF COPY ] on the control panel or touching PROOF COPY
on the Check Screen.
• Punch Mode for FS-110/210 Finisher with PK-110 Punching Kit Installed:
Punches four holes in output copies.
• Repeat
Selects the horizontal image area across the page, and repeats it down the
page as many times as the repeat width setting (10 ~ 150mm) permits in
manual or auto.
Features of the Konica 7155/7165 (continued)
xi