To Check/Control Jobs In Progress (Job Status Screen) - Konica Minolta 7165 Instruction Manual

To Check/Control Jobs in Progress (Job Status Screen)

The Job Status Screen allows you to perform the following functions.
• Confirm machine status
• Delete reserve job
• View noncomplete job list
1.
Touch STATUS on the Basic Screen.
The Job Status Screen will be displayed.
Check the current status of the machine.
2.
Perform the desired setting on the screen.
See the next page for details of the screen.
To change the order of reserve job:
Touch to highlight the desired reserve job key, then touch JOB PRIORITY .
The highlighted reserve job is advanced by one in printing order unless the
job preceding the selected one is already in progress.
To clear reserve job:
Touch to highlight the desired
reserve job key, then touch JOB
CLEAR .
Touch YES to clear the
highlighted reserve job, or NO to
cancel.
To check user name (not copier
information):
Touch USER NAME CHECK to
display the User Name Check
Screen.
Check the user name indicated
on the right side of the job
number and operatio mode.
Touch OK to return to the Job Status Screen.
Copying Using Memory (continued)
• Change order of reserve job
• View previous job list
HINT
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1s1, 2s2
2s1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
FS-110/210
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-37