Table of Contents
Advertisement
Inserting a New Staple Cartridge into FS-110/210 Finisher
When the staple cartridge of the Finisher is empty, the Basic Screen dis-
plays the following message in the message area.
Follow the procedure below to replace the staple cartridge.
Use only the staples supplied by Konica. Please contact your service
representative to purchase.
1.
Open the Finisher door.
2.
Pull out the stacker unit by holding the stacker unit handle.
Please Be Reminded!
Adding Toner
Inserting New
Staple Cartridge
Empty Waste
Basket
Cleaning
Scanning
Section
Checking
Copy Count
Machine
Condition Info.
Copy
Materials
12
Maintenance
& Supplies
12-5
Advertisement
Chapters
Table of Contents
Troubleshooting
