9. User service mode
9.3
SRU USAGE
9.3.1
TRANSFER BELT
Function
• Displays the remaining life of the transfer belt.
Use
• To check the remaining life of the maintenance service parts.
9.3.2
FUSER UNIT
Function
• Displays the remaining life of the fusing unit.
Use
• To check the remaining life of the maintenance service parts.
9.3.3
TRANSFER ROLLER
Function
• Displays the remaining life of the transfer roller.
Use
• To check the remaining life of the maintenance service parts.
9.4
RESET COUNT
9.4.1
TRANSFER BELT
• Resets the counter value of the transfer belt unit.
Function
• Executes the image stabilization sequence.
Use
• To reset the transfer belt unit counter after the transfer belt unit is replaced.
1. Enter the user service mode and call [3. RESET COUNT] to the screen.
2. Select [TRANSFER BELT] and press the Menu Select key.
Setting/
3. Press the Menu Select key.
procedure
4. Turn OFF the machine's main switch.
5. When the machine's main switch is turned ON, the image stabilization is automatically
executed.
9.4.2
FUSER UNIT
Function
• Resets the counter value of the fuser unit.
Use
• To reset the fuser unit counter after the fuser unit is replaced.
1. Enter the user service mode and call [3. RESET COUNT] to the screen.
Setting/
2. Select [FUSER UNIT] and press the Menu Select key.
procedure
3. Press the Menu Select key.
106
Field Service Ver. 1.0 Jul. 2006