Konica Minolta 7165 Instruction Manual page 229

Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure) (continued)
To specify Fold Erasure amount:
• Touch to highlight FOLD , if not highlighted, then use the touch screen key-
pad or up/down arrow key to enter the desired erasure amount, from 1 to
99mm in 1mm increments.
5.
Touch OK .
The Application Selection Screen will be restored.
6.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
7.
Enter the desired print quantity from the control panel keypad.
See p. 3-6 for details on setting print quantity.
8.
Position original(s) FACE UP in the document feeder or FACE
DOWN on the platen glass.
For details on positioning originals, see p. 3-2 to p. 3-5.
When lowering the document feeder onto thick original (e.g. open book),
do not press it down too hard. Keep the document feeder open, if
required.
9.
Press [ START ].
When the finisher / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
HINT
HINT
FOR DETAILS
CAUTION
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Program Job
Non-Image
Area Erase
Reverse
Image
9
Applications
Repeat
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
9-41