Mode - Konica Minolta 7165 Instruction Manual

Output Mode for Machine without Finisher (continued)
1.
When using Rotation sort or Rotation group mode, load the same
paper size into two trays in different orientation.
Non-sort mode is initially selected. Key Operator can change the initial
output mode. See p. 13-10.
2.
Select the desired output mode.
To select Non-sort mode:
Confirm that OUTPUT MENU and SORT are not highlighted on the Basic Screen.
To select Rotation sort mode:
Confirm that OUTPUT MENU is not highlighted, then touch SORT to highlight it.
To select Group, Rotation group, or Face up mode:
(1) Touch OUTPUT MENU on the Basic Screen. The Output Mode popup
menu will be displayed.
(2) Touch to highlight the desired mode key.
To use Face Up mode in combination, simply touch to highlight FACE UP
instead of FACE DOWN .
HINT
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1s1, 2s2
2s1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
FS-110/210
Output Modes
Binding

Mode

Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-41