Konica Minolta 7165 Instruction Manual page 225

Repeating Automatically or Selecting Repeating Times
1.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely,
then press [ AUTO RESET ].
2.
Touch Repeat on the Application Selection Screen.
The Repeat Mode Selection Screen will be displayed.
3.
Touch to highlight the desired mode key.
Touch AUTO to select the Auto Detection mode.
Touch 2 Repeat , 4 Repeat , or 8 Repeat to select the desired Repeat mode.
4.
Touch OK .
The Application Selection Screen will be restored.
Non-Image Area Erase is automatically selected on the Application
Selection Screen when AUTO mode is selected.
When 2 Repeat mode is selected, Page space function of Image Shift
can be used to make the desired amount of blank space between the
two images on a page. See p. 9-46 to p. 9-48.
(Repeat: AUTO/ Repeat Mode) (continued)
Please Be Reminded!
FOR DETAILS
HINT
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Program Job
Non-Image
Area Erase
Reverse
Image
9
Applications
Repeat
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
9-37