Limited Use Of The Copier In Trouble; Call For Service - Konica Minolta 7165 Instruction Manual

When "Call for Service" Message Is Displayed (continued)
3.
Unplug the machine.
4.
Contact your service representative and report the condition and
code No.

Limited Use of the Copier in Trouble

If the message shown below is displayed on the Call for Service Screen, you
may continue operating the copier on a limited function basis and utilize the
trays and ADU that are not affected by the trouble. To obtain this limited
functionality of the copier, consult your service representative. Be sure to
utilize the limited function only temporarily, and arrange for machine repair
immediately.
1.
If the limited use of the copier is available, the following message
is displayed in the message area instead of the Report code.
ex. Tray 2 failure
Press AUTO to select except this tray
2.
Press [AUTO RESET].
Please switch ON/OFF
E 18-2
Make note of the Report code No.
3.
Turn OFF then ON the power switch.
A copying job can be continued without using the troubled portion of the
machine (ex. Tray 2).
EVEN IF THE COPYING JOB CAN BE CONTINUED WITH THE
ABOVE OPERATION, BE SURE TO CONTACT YOUR SERVICE
REPRESENTATIVE IMMEDIATELY WHEN THE CALL FOR
SERVICE SCREEN IS DISPLAYED.
CAUTION
5
T rouble-
shooting
Call for
Service
Preventive
Maintenance
Clearing
Mishandled
Paper
JAM Key
ADD PAPER
Key
Memory
Overflow
Power OFF/ON
Screen
Copying
Hints
5-3