Reducing The Power In Standby Mode (Auto Low Power); Shutting Off Automatically (Auto Shut-Off) - Konica Minolta 7165 Instruction Manual

7155e02v1.fm 16 ページ ２００１年１１月２８日 水曜日 午前１０時３１分
Turning On the Main Power Switch and Power Switch (continued)

Reducing the Power in Standby Mode (Auto Low Power)

This function automatically lowers the power after a specified period (initially
15 minutes) of copier inactivity. The LCD screen becomes dark with the
message "Low Power Mode / Press any key to cancel" displayed.
To start a copying job, press any key on the control panel.
The Auto low power will be released and the LCD screen recovers usual
brightness.

Shutting Off Automatically (Auto Shut-Off)

This function automatically shuts off the power after a specified period
(initially 90 minutes) of copier inactivity.
To start a copying job, press [ POWER SAVER ON/OFF ].
The copying operation will become available.
2-16
HINT
The Auto Low Power function can be set to 5 minutes/ 10 minutes/ 15
minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes
in the Key Operator mode. For the Key Operator setting, see p. 13-38.
FOR DETAILS
• If the Auto Shut-Off function activates at the same time, the power will
be turned off without the LCD screen becoming dark.
• The LCD screen will not be come dark during a duplex copying job or
when the Jam Position Screen is displayed.
HINTS
• The Auto shut-off can be set for 30
minutes/ 60 minutes/ 90 minutes/ 120
minutes/ 240 minutes in the Key Opera-
tor mode. For the Key Operator setting,
see p. 13-38.
• When "Timer interrupt mode / Enter
password" is displayed after pressing
[ POWER SAVER ON/OFF ], see p. 7-2
and follow the procedure to continue.
TIMER
INTERRUPT
POWER SAVER
ON / OFF
PROOF COPY
STOP
AR QTY. START