Timer Interrupt Password Setting - Konica Minolta 7165 Instruction Manual

[5] Timer Interrupt Password Setting

Use this password setting mode to establish a 4-digit password requirement
for using Timer Interrupt function. The default password of 0000 allows the
timer function to be interrupted without the requirement for password entry.
Weekly Timer Setting Menu Screen
Procedure
1 Touch [9] Weekly timer on the Key Operator Mode Screen. Enter your 4-digit
Weekly Timer master key code, then touch OK to display the Weekly Timer
Setting Menu Screen.
NOTE:
If an invalid Weekly Timer master key code is entered, continue by
entering the valid 4-digit code.
2 Touch [5] Timer interrupt password set to display the Timer Interrupt
Password Setting Screen.
3 Use the touch screen keypad to enter a 4-digit password, and then touch OK to
complete the setting and return to the Weekly Timer Setting Menu Screen.
NOTE:
When the password setting is 0000, timer interrupt can be used simply
by turning the copier OFF, then ON. In this case, you will be asked to
enter the duration of use (a period of time to turn the copier power on).
4 Touch RETURN to restore the Key Operator Mode Screen.
5 If no further changes are required, touch RETURN to restore the Basic Screen
to perform copying operations.
[9] Weekly Timer (continued)
Timer Interrupt Password Setting Screen
Key Operator
Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.K.C.
Lock/Delete
Job Memory
Paper Type/
Special Size
Panel Contrast/
Key Sound
Key Operator
Data Setting
Weekly
Timer
Control Panel
Adjustment
Tray Auto
Select Setting
Power Save
Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Centre
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Scan
Transmission
Non-Image
Area Erase
13
Key Operator
Mode
13-35