Konica Minolta 7165 Instruction Manual page 193

Inserting Sheets and Covers (Sheet/Cover Insertion) (continued)
5.
Touch CHANGE COVERS TRAY to select the cover sheet tray
source.
The tray source for covers currently selected is displayed on the Sheet/Cover
Insertion Screen.
Every touch of the key shifts the selection in the display that includes paper
type as specified in Key Operator mode.
If no insertion is desired, proceed to step 8 .
6.
When selecting Insertion mode:
Enter the page number.
Touch to select the desired insertion mode, then use the control panel keypad
to enter the page number of insertion location.
Touch SET after each entry to move to the next key.
To clear an incorrect entry, touch DELETE . The insertion location will be
deleted.
See p. 9-6 for details on entering page numbers.
7.
Touch CHANGE INSERTION TRAY to select the insertion tray
source.
The tray source for covers currently selected is displayed on the Sheet/Cover
Insertion Screen.
Every touch of the key shifts the selection in the display that includes paper
type as specified in Key Operator mode.
8
. When all settings are completed, touch OK to return to the
Application Selection Screen.
The Basic Screen will be restored.
9.
Enter the desired print quantity from the control panel keypad.
See p. 3-6 for details on setting print quantity.
HINT
HINT
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
OHP
Interleave
Image Insert
Dual Page
Program Job
Non-Image
Area Erase
Reverse
Image
9
Applications
Repeat
Frame/Fold
Erasure
AUTO
Layout
Full-Image
Area
Image Shift
Reduce &
Shift
Stamp
Overlay
Overlay
Memory
9-5