Konica Minolta 7165 Instruction Manual page 278

7155e10v1.fm 22 ページ ２００１年１１月２８日 水曜日 午前１１時４４分
Editing Image Data Using PC (Image Edit) (continued)
6.
Press [ START ] to scan.
After scanning is completed, the Image Data Edit Screen will be displayed to
indicate that the scanned image data is ready for transmission.
7.
Perform the data transmission procedure on PC, then edit the
image data as required.
When completed, make a setting on PC to return the edited data to DIMM.
The Basic Screen will be restored.
8.
Press [ START ].
The copier starts the printing job.
When printing is completed, edited data will be deleted automatically.
10-22
FOR DETAILS
To stop the Image Edit operation while the Image Data Edit Screen is
displayed, touch EXIT . If the popup menu shown below is displayed,
touch YES to cancel the editing job and delete the image data, or touch
NO to continue.
HINT
For details, refer to the instruction manual for Image Edit mode.