Konica Minolta 7165 Instruction Manual page 347

[20] Job offset operating
Set the copier to offset the copies of different jobs when outputting multiple reserve
jobs in succession.
[21] Continuation print
Set the copier to output multiple reserve jobs in succession.
[22] Key click sound
Activate or deactivate the sound each time a key is pressed on the touch panel .
[23] 1 SHOT indication time
Select the SHOT indication time function.
[24] Power save screen
Select the screen to display when pressing the [POWER SAVER ON/OFF] key.
[25] START key latch function
Activate or deactivate the latch function.
[26] STOP key function
Select to display or not to display the confirmation message when [STOP] key is
pressed.
[27] Auto select of Booklet copy
Set the copier with FS-210 mounted to automatically select the Booklet mode when
Stitch&Fold or Fold output mode is selected.
[28] E.K.C. password
Select the acceptable number of digits for the EKC master key code.
[29] Arrow key change (Image Shift)
Select the 1 step unit of the touch key to specify the shift amount in Image shift.
[30] Exit direction of 1 sheet
Select to exit face up or face down when making only 1 sheet of copy.
[31] An interruption suspended way
Select the timing to stop the job in progress when [INTERRUPT] is pressed.
[13] Memory Switch Setting (continued)
Key Operator
Mode
System Initial
Setting
Copier Initial
Setting
User Setting
Mode
E.K.C.
Lock/Delete
Job Memory
Paper Type/
Special Size
Panel Contrast/
Key Sound
Key Operator
Data Setting
Weekly
Timer
Control Panel
Adjustment
Tray Auto
Select Setting
Power Save
Setting
Memory
Switch
Machine
Management
List Print
Call Remote
Centre
Side 2 Lens
Adjustment
Finisher
Adjustment
HDD
Management
Scan
Transmission
Non-Image
Area Erase
13
Key Operator
Mode
13-43