Konica Minolta 7165 Instruction Manual page 172

7155e07v1.fm 24 ページ ２００１年１１月２８日 水曜日 午後５時３３分
❒ The 7155/7165 is provided with an Allocation recovery mode, which functions
when trouble occurs in either the primary or secondary copier to allow the
trouble-free copier to complete the job.
❒ When the two copiers in tandem mode have the same EKC password
registered, copying will be available by entering the EKC password in the
primary copier only. The password will be transmitted to the secondary
copier.
❒ Interrupt copying is available only on the copier with [ INTERRUPT ] pressed.
❒ If the primary copier is installed with HDD, the image data stored in HDD
can be output in tandem mode copying.
❒ Corresponding tray sizes on the primary and secondary copiers should be
the same when using multiple trays for a single job.
❒ Incompatible Conditions: Rotation Sort, Rotation Group, Group, Rotation,
OHP Interleave, SET NUMBERING and WATERMARK NUMBERING in
Stamp
1.
Turn power on by pressing the Power switches of the two copiers.
Confirm that both copiers are ready to copy with the Basic Screen displayed.
2.
Touch OUTPUT MENU on the Basic Screen of either copier.
The Output Mode popup menu will be displayed.
3.
Touch TANDEM to highlight it, then touch OK .
The copier with TANDEM highlighted will become the primary copier; the
other copier will function as the secondary copier. The Master icon displays
on the Basic Screen of the primary copier to indicate that the two units are
ready to work in tandem mode.
7-24
Using Two Copiers in Tandem (continued)