Konica Minolta 7165 Instruction Manual page 212

7155e092v1.fm 24 ページ ２００１年１１月２７日 火曜日 午後４時１５分
Dividing an Image into Right and Left Pages (Dual Page) (continued)
7.
Select the desired copy mode, magnification, and paper size.
8.
Enter the desired print quantity from the control panel keypad.
9.
Position original(s).
When using platen glass to scan, position the first page FACE DOWN with
document feeder kept open.
When using document feeder, position original(s) FACE UP.
For details on scanning originals in Front cover + Facing pages and Front/
Back Cover + Facing pages mode, see the description on the following page.
10.
Press [ START ] to scan.
11.
Repeat steps 9 and 10 for all originals.
12.
Touch STORE to exit the Store mode.
13.
Press [ START ].
The copier will start printing when ready for output.
9-24
FOR DETAILS
• Available paper size is A4 or B5.
• When selecting Facing pages mode and scanning from the platen
glass, select 1 s 1 or 1 s 2 copy mode.
• APS and AMS are released and 1.00 magnification is selected auto-
matically. Change the magnification manually, if desired.
HINT
See p. 3-6 for details on setting print quantity.
Please Be Reminded!
When using platen glass, Non-Image Area Erase and AUTO Layout are
automatically selected.
DO NOT CLOSE the document feeder throughout the scanning job.
CAUTION
When the finisher / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.