Konica Minolta 7165 Instruction Manual page 192

7155e091v1.fm 4 ページ ２００１年１１月２８日 水曜日 午前１１時３１分
Inserting Sheets and Covers (Sheet/Cover Insertion) (continued)
1.
Load regular sheets into any tray, and insertion sheets and covers
into each tray source to be designated on the Sheet/Cover Inser-
tion Screen.
2.
Touch APPLICATION on the Basic Screen.
3.
Touch Sheet/Cover Insertion on the Application Selection Screen.
The Sheet/Cover Insertion Screen will be displayed.
4.
Select the desired cover mode.
Example: Touch FRONT COPY to insert a copied front cover.
9-4
FOR DETAILS
• When using thick paper or tabbed paper for covers or insertions, load
them in the Multi-sheet bypass tray, unless previously specified and
loaded in any other tray.
• Be sure that the trays for copy paper, front/back covers, and inser-
tions should have the same paper size loaded.
Please Be Reminded!
When starting a new copying job, be sure to close the RADF securely,
then press [ AUTO RESET ].