7155e033v1.fm 48 ページ 2001年11月28日 水曜日 午前11時15分
Touch OK to restore the Basic Screen. OUTPUT MENU will be highlighted,
and the output icon of the selected output mode will be displayed in the
output icon area.
6.
Select additional copy conditions, as desired.
7.
Enter the desired print quantity from the control panel keypad.
8.
Position original(s).
9.
Press [ START ].
Press [ STOP ] to suspend the scanning or printing job.
3-48
Output Mode for Machine with Finisher (continued)
HINT
See p. 11-3 to be sure that the finisher capacity is not exceeded.
HINT
See p. 3-2 to p. 3-5 for details on positioning originals.
CAUTION
When the finisher exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.