Konica Minolta 7165 Instruction Manual page 103

Output Mode for Machine with Finisher (continued)
❒ Incompatible with Group mode: 1 s 2 or 2 s 2 mode using platen glass
(unless Platen store mode is used), Proof Copy, Fold, Stitch & Fold, Three-
Fold, Sheet/Cover Insertion, Chapter, Combination, Booklet, OHP
Interleave, Image Insert, Repeat
❒ Incompatible with Group using Secondary (sub) tray: 1 s 2 or 2 s 2 mode using
platen glass (unless Platen store mode is used), Proof Copy, Fold, Stitch &
Fold, Three-Fold, Punch, Cover sheet feeding, Sheet/Cover Insertion, Chapter,
Combination, Booklet, OHP Interleave, Image Insert, Repeat
❒ Incompatible with Face Up exit: 1 s 2 or 2 s 2 mode using platen glass, Fold,
Stitch & Fold, Three-Fold, Punch, Cover sheet feeding
1.
Close the RADF securely, then press [ AUTO RESET ].
The Sort mode using Primay (main) tray is initially selected.
Key Operator can change the initial output mode. See p. 13-10.
2.
Select the desired output mode.
To set Non-sort or Sort mode using Primary (main) tray: proceed to the next
step.
To set Staple-sort mode using Primary (main) tray: proceed to step 4 .
To set Group mode using Primary (main) tray or output to Secondary (sub)
tray: proceed to step 5 .
3.
To set Non-sort or Sort mode:
Check that SORT is already highlighted on the Basic Screen in initial condition.
To select Non-sort mode, touch SORT to deselect it.
Proceed to step 6 .
HINT
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1s1, 2s2
2s1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
FS-110/210
Output Modes
Binding
Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode
3-45