Page 1 MANUEL 7155/7165 UTILISATEUR Basic Advanced...
Page 3: Table Of Contents
Contents Safety Information Contents Features of the Konica 7155/7165 Machine Information Basic Copying Operations Section 1: Safety Information Safety Information Job Memory &Help Mode Caution Labels and Indicators ..............1-2 Requirements for Safe Use ............... 1-5 Power Source ..................1-5 Trouble- Environment..................
Page 4 7155econtv1.fm ii ページ２００１年１１月２８日　水曜日　午後５時３１分 Contents (continued) Section 3: Copying Operations Copying Operations Positioning Originals.................. 3-2 Positioning Originals in RADF ............3-2 Positioning Original on Platen Glass ..........3-5 Setting Print Quantity ................3-6 To Set Print Quantity................3-6 To Change Print Quantity ..............3-6 Setting Job During Warm-up ..............
Page 5 Contents (continued) Safety Information Section 4: Job Memory & Help Mode J ob Memory Machine &Help Mode Information Storing Job Conditions (Job Memory: Job Store)........4-2 Recalling Stored Job Settings (Job Memory: Job Recall) ......4-5 Displaying Screen for Operation Guide (Help Mode) ........ 4-6 Copying Operations To Display Help Screen from Basic Screen ........
Page 6 7155econtv1.fm iv ページ２００１年１１月２８日　水曜日　午後５時３１分 Contents (continued) Advanced Section 7: Advanced Information A dvanced Information Programmed Shut-Off (Weekly Timer) ............7-2 Rotation ..................... 7-5 Vertical/Horizontal Zoom Mode ..............7-6 Making Folded Booklet (Fold / Stitch&Fold) ..........7-9 Punching File Holes in Copies (Punch) ........... 7-12 Output Three-Folded Copies (Three-Fold) ..........
Page 7 Contents (continued) Safety Information Section 9: Applications (continued) Repeating Automatically or Selecting Repeating Times Machine (Repeat: AUTO/ Repeat Mode) .... 9-36 Information Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure) ..9-39 Copying Image in the Centre of Copy Paper (AUTO Layout) ....9-42 Printing Images Fully to the Edges (Full-Image Area)......
Page 8 7155econtv1.fm vi ページ２００１年１１月２８日　水曜日　午後５時３１分 Contents (continued) Section 12: Maintenance & Supplies Maintenance & Supplies Adding Toner.................... 12-2 Inserting a New Staple Cartridge into FS-110/210 Finisher....12-5 Empty Waste Basket of PK-110 Punching Kit ......... 12-8 Cleaning Image Scanning Section ............12-10 Cleaning the Document Glass ............
Page 9 Contents (continued) Safety Information Section 13: Key Operator Mode (continued) [9] Weekly Timer ..................13-27 Machine How to Access the Weekly Timer Setting Mode ......13-28 Information [1] Weekly Timer On/Off Setting ............. 13-29 [2] Timer Setting ................13-30 [3] Timer Action On/Off Setting ............13-32 Copying [4] Lunch Hour Off Setting ..............
Page 10: Features Of The Konica
7155econtv1.fm viii ページ２００１年１１月２８日　水曜日　午後５時３１分 Features of the Konica 7155/7165 • AE - Automatic Exposure Automatically adjusts exposure to compensate for quality of the original. • AMS - Automatic Magniﬁcation Selection Automatically selects an appropriate magniﬁcation ratio when Paper Size is selected manually.
Page 11 Features of the Konica 7155/7165 (continued) • Counter List Displays on the screen and prints the following data: total counter of the machine, copier counter, print counter and the date when the counter started. • Density Shift Shifts each of nine density levels in four density modes (Auto, Text, Photo, Increase Contrast) to three levels lighter or three levels darker.
Page 12 • Non STD Size for Original Identifies the special original size which the 7155/7165 cannot detect, in order to select the optimal paper size for copying or printing. • OHP Interleave When using transparency ﬁlm, select either Blank or Copy Sheet...
Page 13 ページ 7155econtv1.fm xi ２００１年１１月２８日　水曜日　午後５時３１分 Features of the Konica 7155/7165 (continued) • Output for FS-110/210 Finisher with PI-110 Cover Sheet Feeder Installed: Cover Sheet mode Manual Finishing mode For details, see Section 7: Advanced Information. • Overlay Scans an original image and overlays it on the pages of another document.
Page 14 7155econtv1.fm xii ページ２００１年１１月２８日　水曜日　午後５時３１分 Features of the Konica 7155/7165 (continued) • Reserve Scans in subsequent copy jobs while the 7155/7165 is busy printing or copying. • Reverse Image Reverses the image from black-on-white to white-on-black or vice versa. • Rotation Rotates the image before copying when the portrait/landscape orientation of the original is different from the orientation of the copy paper.
Page 15 Features of the Konica 7155/7165 (continued) • Text/Photo Enhance Enhances photo image in Photo mode, regular image in Text/Photo mode, text image in Text mode, lighter image in Increase Contrast mode. • Userset Density (USERSET 1, USERSET 2) Outputs up to 16 density samples on a total of 4 pages that display 4 samples per page, then programs the desired density under USERSET 1 and/or USERSET 2.
Page 16 7155econtv1.fm xiv ページ２００１年１１月２８日　水曜日　午後５時３１分...
Page 17 Safety Information Basic Machine Information Copying Operations Job Memory &Help Mode Trouble- shooting Machine Specifications Advanced Information Special Original Applications Server Function Paper & Original Info Maintenance & Supplies Key Operator Mode...
Page 18 7155eindexv1.fm -iv ページ２００１年１１月２８日　水曜日　午後１２時０分...
Page 19: Safety Information
Safety Information Safety Information Precautions for Installation and Use aution Labels and Indicators ............1-2 equirements for Safe Use............1-5...
Page 20: Caution Labels And Indicators
7155au01v1.fm 2 ページ２００１年１１月２７日　火曜日　午後３時４４分 Caution Labels and Indicators The caution labels and indicators are attached to the machine areas, as shown below, where you are advised to pay special attention to avoid any dangerous situations or serious injury. CAUTION CAUTION DO NOT INSERT your finger into the WARNING...
Page 21 Caution Labels and Indicators (continued) Safety Information (Finisher with PI-110 Cover Sheet Feeder only) CAUTION DO NOT trap your fingers when closing this cover; otherwise you may be injured. CAUTION (All trays) CAUTION DO NOT put your hand between the main body and tray;...
Page 22 7155au01v1.fm 4 ページ２００１年１１月２７日　火曜日　午後３時４４分 Caution Labels and Indicators (continued) The following indicators are used on the caution labels or in this manual to categorize the level of safety cautions. DANGER: Action highly liable to cause a death or serious injury. WARNING: Action liable to cause a death or serious injury.
Page 23: Requirements For Safe Use
Secure the cord with a ﬁxture properly. b. If the power cord or sheath is damaged, replace with a new power cord (with plugs on both ends) speciﬁed by Konica. If the power cord (inlet type) is not connected to the copier securely, a contact problem may lead to increased resistance, overheating, and risk of ﬁre.
Page 24: Environment
7155au01v1.fm 6 ページ２００１年１１月２７日　火曜日　午後３時４４分 Requirements for Safe Use (continued) CAUTION: Connecting Multiple Loads to One Socket Outlet Prohibited Never connect multiple loads to one socket outlet using a multi-outlet extension lead or branched socket. Otherwise an accident may occur as a result of overheating or ﬁre.
Page 25 1836 Konica 7155/7165 (Unit: mm) 1620 1620 1140 2021 1836 Konica 7155/7165 + FS-110 Finisher + LT-402 Large Capacity Tray (Unit: mm) 1620 1620 1140 2261 1836 Konica 7155/7165 + FS-210 Finisher + PI-110 Cover Sheet Feeder + LT-412 Large Capacity Tray...
Page 26: Precautions For Routine Handling
7155au01v1.fm 8 ページ２００１年１１月２７日　火曜日　午後３時４４分 Requirements for Safe Use (continued) Precautions for Routine Handling WARNING: High Voltage DO NOT TOUCH the high voltage parts indicated with WARNING label or described in the manual. CAUTION: Actions in Response to Troubles • If the Service Call screen is displayed and copier operations cannot be continued any more, stop the operation to prevent any unexpected accident.
Page 27 Requirements for Safe Use (continued) Safety Information CAUTION: Prevention of Machine Troubles • Do not drop small metallic objects such as paper clips or staples inside the machine. • Do not place any heavy or hard objects such as a vase, books or ornaments on the machine.
Page 28 7155au01v1.fm 10 ページ２００１年１１月２７日　火曜日　午後３時４４分 Requirements for Safe Use (continued) CAUTION: Finisher Paper Exit Outlet To avoid injury when stapling large size copies, DO NOT put your hand into the open Paper Exit Outlet. CAUTION: Fixing Unit The Fixing unit is internally very hot. To avoid getting burned, DO NOT TOUCH.
Page 29: Machine
Machine Information Machine Configuration Turn On/Off the Power Loading Paper Changing Paper Size Machine Information Machine Conﬁguration, Turning On the Power and Loading Paper achine Conﬁguration..............2-2 urning On the Main Power Switch and Power Switch ....2-13 oading Paper ................2-19 hanging Paper Size of Universal Tray........
Page 30: Machine Conﬁguration
7155e02v1.fm 2 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Machine Conﬁguration External Machine Items !7 Control panel q RADF w Toner access door !6 LCD Touch screen e Work table !4 Power switch r Key counter (option) t Multi-sheet !2 FS-110 Finisher bypass tray (option) !5 Main power switch !1 Front doors !0 Tray 1...
Page 31 Machine Conﬁguration (continued) q RADF (Reversing Automatic Document Feeder) automatically feeds multiple originals one at a time to the platen glass for copying. Machine w Toner access door opens to allow replenishing of toner. Information e Work table provides a convenient workspace for documents both before Machine Configuration and after copying.
Page 32: Internal Machine Items
7155e02v1.fm 4 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Machine Conﬁguration (continued) Internal Machine Items q Toner cartridge u Total counter y Fixing unit w Toner cartridge holder lever e Conveyance/ Fixing unit r Lever A t Drum unit q Toner cartridge holds toner and is to be replaced when supplying toner. w Toner cartridge holder lever can be pulled forward to withdraw the toner cartridge holder for replacing the toner cartridge.
Page 33: Information
IP-511 Printer controller Turn On/Off the Power MU-401/402 Memory unit PI-110 Cover sheet feeder Loading HD-105 Hard disk drive Paper Changing Paper Size Key counter FS-110 Finisher LT-402 Large capacity tray Konica 7155/7165 main body FS-210 Finisher LT-412 Large capacity tray...
Page 34: Fs-110/Fs-210 Finisher (+Pk-110 Punching Kit)
7155e02v1.fm 6 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Machine Conﬁguration (continued) FS-110/FS-210 Finisher (+PK-110 Punching Kit) t Secondary t Secondary (Sub) tray (Sub) tray q Finisher door q Finisher door r Primary r Primary (Main) tray (Main) tray e Booklet tray w Booklet mode outlet (FS-210 Finisher only) (FS-210 Finisher only) FS-110 Finisher...
Page 35 Machine Conﬁguration (continued) r Sub tray r Sub tray conveyance lever conveyance lever Machine Information e Cover sheet e Cover sheet conveyance conveyance Machine lever lever Configuration t Stacker Turn On/Off w PK-110 Punching conveyance the Power lever kit (option) Loading Paper q Entrance lever...
Page 36: Cover Sheet Feeder
7155e02v1.fm 8 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Machine Conﬁguration (continued) PI-110 Cover Sheet Feeder e Upper tray guide plates r Upper tray w Upper unit release lever t Lower tray y Lower tray guide plates q Cover sheet feeder control panel q Cover sheet feeder control panel controls cover sheet feeder operations. w Upper unit release lever can be moved to slide the upper unit of cover sheet feeder for removal of mishandled paper.
Page 37: Lt-402/Lt-412 Large Capacity Tray
Machine Conﬁguration (continued) LT-402/LT-412 Large Capacity Tray Machine Information q LCT top door q LCT top door w LCT left w LCT left side door side door Machine Configuration Turn On/Off the Power Loading e LCT lever e LCT lever Paper Changing Paper Size...
Page 38: Basic Screen
7155e02v1.fm 10 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Machine Conﬁguration (continued) Basic Screen The Basic Screen displays when copying operation becomes available after warm-up. o STATUS key t Master/ Sub/ HDD/ Rotation/ q Folder keys i Memory indicator Original direction icons w Notice icons u Count/Set indicator e Message area r Original count...
Page 39 Machine Conﬁguration (continued) : HDD icon is displayed when using Image Store & Output mode of Server function. Machine Information : Rotation icon is displayed when Rotation automatically functions. Machine Configuration : Original direction icon indicates the original direction Turn On/Off the Power speciﬁed on the Special Original popup menu.
Page 40: Control Panel Layout
7155e02v1.fm 12 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Machine Conﬁguration (continued) Control Panel Layout COPY TIMER SCAN / SERVER PRINT INTERRUPT POWER SAVER ON / OFF PROOF COPY CHECK HELP STOP JOB MEMORY AUTO RESET COUNTER CLEAR QTY. START q Power switch turns copier power On/Off when pressed. w LCD TOUCH SCREEN displays machine and copying status, help information, interactive screens, and touch keys for selecting all functions.
Page 41: Turning On The Main Power Switch And Power Switch
7155e02v1.fm 13 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Turning On the Main Power Switch and Power Switch This machine is equipped with two power switches. Machine Information To Turn On the Power Machine Configuration Turn ON the main power switch. Turn On/Off the Power The main power switch is located on the rear left side of the main body.
Page 42 A few seconds after the Wake-up Screen appears in the LCD touch screen, seven types of Warm-up Screens will be displayed in succession for approx. 5.5 minutes (7155) / 6.0 minutes (7165). HINT Setting reserve job is available while the machine is warming up. Touch the LCD screen to change the Warm-up Screen to the Basic Screen, then check that the message “Ready to copy reserve”...
Page 43: To Turn Off The Power
Turning On the Main Power Switch and Power Switch (continued) To Turn Off the Power Machine Turn OFF the power switch. Information The power switch is located on the far left side of the control panel. Machine Configuration The touch screen and all the LEDs on the control panel will go out. Turn On/Off the Power Loading...
Page 44: Reducing The Power In Standby Mode (Auto Low Power)
7155e02v1.fm 16 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Turning On the Main Power Switch and Power Switch (continued) Reducing the Power in Standby Mode (Auto Low Power) This function automatically lowers the power after a speciﬁed period (initially 15 minutes) of copier inactivity. The LCD screen becomes dark with the message “Low Power Mode / Press any key to cancel”...
Page 45: Shutting Off / Reducing The Power Manually
Turning On the Main Power Switch and Power Switch (continued) Shutting Off / Reducing the Power Manually Follow the procedure below to shut off the power manually. Machine Information HINT Machine Configuration The machine is initially set to activate the Manual Shut-Off function. The Manual Low Power can be selected in the Key Operator setting.
Page 46: Entering An Ekc Password (Ekc)
7155e02v1.fm 18 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Turning On the Main Power Switch and Power Switch (continued) Entering an EKC Password (EKC) The Electronic Key Counter (EKC) allows the Key Operator to monitor all copying activities by controlling EKC password accounts. Copy quantity limits for speciﬁc accounts can be set.
Page 47: Loading Paper
7155e02v1.fm 19 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Loading Paper A paper indicator is shown on each tray key of the Basic Screen to indicate the paper level of the tray. (Six levels are provided: Machine Information When paper in a tray becomes empty, the indicator “ ”...
Page 48 7155e02v1.fm 20 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Loading Paper (continued) Place paper on the tray with the curl side turning up. Load paper aligning it to the right side of the tray. Please Be Reminded! • Do not load above the red line on the side guide plates. •...
Page 49: Loading Paper In Tray 3
Loading Paper (continued) Loading Paper in Tray 3 Machine Withdraw tray 3. Information Machine HINT Configuration Turn On/Off See p. 2-2 to check positions of each tray. the Power Loading Paper Please Be Reminded! Changing Do not withdraw the tray forcibly; otherwise you may be injured. Paper Size Open the paper feed roller.
Page 50 7155e02v1.fm 22 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Loading Paper (continued) Add paper on the tray. Please Be Reminded! Do not load above the red line on the side guide plates. When paper is seated properly, close the paper feed roller. Push in the tray until it locks into place. “...
Page 51: Loading Paper In Lct (Lt-402/Lt-412)
Loading Paper (continued) Loading Paper in LCT (LT-402/LT-412) Machine Open the LCT top door. Information Machine Configuration Press the paper loading button to lower the LCT bottom plate. Turn On/Off the Power LT-402 LT-412 Loading Paper Changing Paper Size Please Be Reminded! Be sure that both main power switch and power switch are turned on before loading paper in the LCT.
Page 52 7155e02v1.fm 24 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Loading Paper (continued) Repeat the steps 2 and 3 until the bottom plate will not go down any more. LT-402 LT-412 Please Be Reminded! • Do not load above the red line on the side guide plates. •...
Page 53: Loading Paper In Multi-Sheet Bypass Tray
Loading Paper (continued) Loading Paper in Multi-Sheet Bypass Tray Machine Open the Multi-sheet bypass tray located on the right side of the Information copier. Machine Configuration Turn On/Off the Power Loading Paper Changing Paper Size Load copy paper, and adjust the paper guides to the paper size. The loaded paper size will be indicated on the bypass tray key of the Basic Screen.
Page 54: Loading Tabbed Sheets In Tray 1, 2, Or 3
7155e02v1.fm 26 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Loading Paper (continued) Loading Tabbed Sheets in Tray 1, 2, or 3 When TAB is displayed on the tray key of the Basic Screen, follow the proce- dure below to supply the tray with tabbed sheets. HINT The tray paper type can be speciﬁed in the Key Operator setting.
Page 55: Loading Tabbed Sheets In Lct (Lt-402/Lt-412)
Loading Paper (continued) Loading Tabbed Sheets in LCT (LT-402/LT-412) Machine Example: 3 Tabbed sheets loaded in position for one finished set. Information Rear 1st TAB Machine Configuration 1st TAB Section 1 2nd TAB Introduction Section 1 Turn On/Off Introduction Printed the Power 2nd TAB 3rd TAB...
Page 56: Loading Tabbed Sheets In Multi-Sheet Bypass Tray
7155e02v1.fm 28 ページ２００１年１１月２８日　水曜日　午前１０時３１分 Loading Paper (continued) Loading Tabbed Sheets in Multi-Sheet Bypass Tray Example: 3 Tabbed sheets loaded in position for one finished set. 1st TAB 1st TAB Section 1 Rear 2nd TAB Introduction Section 1 2nd TAB Introduction Printed side 3rd TAB...
Page 57: Changing Paper Size Of Universal Tray
Changing Paper Size of Universal Tray The universal trays are user-adjustable. Change the paper size of the tray according to the procedure below. Machine Information Machine Withdraw the tray of the size to be changed. Configuration Turn On/Off Open the paper feed roller. the Power Loading Paper...
Page 58 7155e02v1.fm 30 ページ２００１年１１月２８日　水曜日　午前１０時３１分...
Page 59 Copying Operations Positioning Originals Setting Print Quantity Copying Operations Set Job During Warmup How to Make a Basic Copy Stop Scan/Print Paper Size ositioning Originals ................ 3-2 Lens Mode etting Print Quantity..............3-6 Density etting Job During Warm-up............3-7 1s1, 2s2 o Stop Scanning/Printing............
Page 60: Positioning Originals
7155e031v1.fm 2 ページ２００１年１１月２８日　水曜日　午前１０時５２分 Positioning Originals Positioning Originals in RADF The document feeder (RADF) automatically feeds up to 100 originals directly to the platen area, starting with the top sheet. The RADF should only be used for unstapled, smooth, ﬂat originals. Positioning originals in Normal mode Arrange originals in order.
Page 61 Positioning Originals (continued) Positioning originals in Mixed original mode Mixed size originals can be copied together from the document feeder. HINT To use the Mixed original mode, see procedure on p. 8-6 to p. 8-7. Arrange originals in order. Copying Operations Arrange the mixed size originals as illustrated below.
Page 62 7155e031v1.fm 4 ページ２００１年１１月２８日　水曜日　午前１０時５２分 Positioning Originals (continued) Positioning originals in Z-Folded original mode Z-Folded original mode detects the folded original size without using the size detection sensor of the RADF. HINT To use the Z-Folded original mode, see procedure on p. 8-8 to p. 8-9. Arrange originals in order.
Page 63: Positioning Original On Platen Glass
Positioning Originals (continued) Positioning Original on Platen Glass Use the platen glass when originals are not suitable for use with the document feeder, e.g., when size is incompatible, or when originals are folded, stapled, torn, or in generally poor condition. Raise the document feeder.
Page 64: Setting Print Quantity
7155e031v1.fm 6 ページ２００１年１１月２８日　水曜日　午前１０時５２分 Setting Print Quantity This section describes how to set or change print quantity. To Set Print Quantity The copier is initially set to copy the original set in amounts determined by the print quantity setting, then outputs sorted sets. Enter the desired print quantity from the control panel keypad.
Page 65: Setting Job During Warm-Up
Turn on the main power and power switches of the machine. A few seconds after the Wake-up Screen appears in the LCD touch panel, Copying seven types of Warm-up Screen display in succession for approx. 5.5 minutes Operations (7155) / 6.0 minutes (7165). Positioning Originals Setting Print Quantity...
Page 66 7155e031v1.fm 8 ページ２００１年１１月２８日　水曜日　午前１０時５２分 Setting Job During Warm-up (continued) When scanning is completed, the highlighted FREE JOB folder key will change to RESERVE JOB , and the next FREE JOB becomes active. If setting more than one reserve job, touch the next FREE JOB to highlight it.
Page 67: To Stop Scanning/Printing
To Stop Scanning/Printing Follow the procedure below to stop scanning or printing. Touch to highlight SCAN JOB or PRINT JOB to be suspended. Press [STOP]. Copying Operations TIMER INTERRUPT Positioning POWER SA Originals ON / OF PROOF COPY Setting Print Quantity STOP Set Job During...
Page 68: Selecting Paper Size
7155e031v1.fm 10 ページ２００１年１１月２８日　水曜日　午前１０時５２分 Selecting Paper Size To select an appropriate paper size for getting your desired copy result, use APS (Automatic Paper Selection), or select paper size manually on the touch screen, as required. To Select Paper Size Automatically (APS) APS detects the size of originals placed on the RADF or platen glass and automatically selects and feeds copy paper of the same size, or selects an appropriate size according to the magniﬁcation ratio selected.
Page 69: Multi-Sheet Bypass Tray
Selecting Paper Size (continued) Press [START]. Scanned image will be printed on the paper size automatically selected. FOR DETAILS • If the appropriate copy paper is not loaded in any tray, no copying will Copying be performed, and a message will prompt you to load the appropriate Operations paper.
Page 70: To Specify Desired Paper Size (Ams)
7155e031v1.fm 12 ページ２００１年１１月２８日　水曜日　午前１０時５２分 Selecting Paper Size (continued) To Specify Desired Paper Size (AMS) When a paper size is speciﬁed on the touch screen, an appropriate reduc- tion or enlargement ratio will be selected automatically according to the original size detected from the RADF or the platen glass. HINTS •...
Page 71 Selecting Paper Size (continued) FOR DETAILS Copy result may not be satisfactory due to the Rotation function. In this case, set the function OFF manually. See. p. 7-5. See the table below for the relation of original size, copy paper size, and magniﬁcation ratio automatically selected.
Page 72: Selecting Magniﬁcation Ratio (Lens Mode)
7155e031v1.fm 14 ページ２００１年１１月２８日　水曜日　午前１０時５２分 Selecting Magniﬁcation Ratio (Lens Mode) When the copier is turned ON, the magniﬁcation ratio is set to 1.00 (100%) automatically on the Basic Screen. Follow each procedure described in this section to select the desired magniﬁcation ratio. To Copy in 1.00 Magniﬁcation Mode Follow this procedure to make a 100% copy of the original image.
Page 73: To Copy In Fixed Magniﬁcation Mode (Re)
7155e031v1.fm 15 ページ２００１年１１月２８日　水曜日　午前１０時５２分 Selecting Magniﬁcation Ratio (Lens Mode) (continued) To Copy in Fixed Magniﬁcation Mode (RE) Use the 8 preset ratios (0.50, 0.71, 0.82, 0.86, 1.15, 1.22, 1.41, 2.00) and 3 user preset ratios to increase or decrease magniﬁcation in ﬁxed amounts. >>>...
Page 74: To Copy In Zoom Mode
7155e031v1.fm 16 ページ２００１年１１月２８日　水曜日　午前１０時５２分 Selecting Magniﬁcation Ratio (Lens Mode) (continued) To Copy in Zoom Mode Use the Zoom mode to reduce or enlarge the copied original image in 1% increments. >>> Speciﬁcation for Zoom Mode <<< Zoom range: 0.25 ~ 4.00 Incompatible Conditions: AMS, Repeat mode in Repeat, Reduce &...
Page 75 Selecting Magniﬁcation Ratio (Lens Mode) (continued) See p. 3-6 for details on setting print quantity. Position original(s). HINT See p. 3-2 to p. 3-5 for details on positioning originals. Copying Operations Press [START]. Positioning Originals Setting Print Quantity Set Job During Warmup Stop Scan/Print...
Page 76: Selecting Density Level
7155e031v1.fm 18 ページ２００１年１１月２８日　水曜日　午前１０時５２分 Selecting Density Level Automatic Exposure (AE) operates with the default settings. It detects the density of the original image and automatically selects the appropriate exposure for the copy. A B C D A B C D A B C D E F G H E F G H...
Page 77: Output Without Finisher
Selecting Density Level (continued) Select additional copy conditions, as desired. HINT See p. 13-12 to p. 13-13 to set the user-set density. Enter the desired print quantity from the control panel keypad. Copying Operations HINT Positioning Originals See p. 3-6 for details on setting print quantity. Setting Print Quantity Position original(s).
Page 78: Density Shift
7155e031v1.fm 20 ページ２００１年１１月２８日　水曜日　午前１０時５２分 Selecting Density Level (continued) Density Shift Use this function to shift each of nine density levels to three levels lighter or three levels darker. This function can be set to use in combination with each of AUTO (Text/Photo), Text, Photo and Increase Contrast modes other than the general mode.
Page 79: Making Double-Sided Copy (1S2, 2S2)
Making Double-Sided Copy (1s2, 2s2) The Basic Screen is initially set to 1s1 copy mode to make single-sided copies from single-sided originals. Follow the procedure below to make double-sided copies from the originals scanned from the document feeder or from the platen glass. Copying Using RADF Operations...
Page 80 7155e032v1.fm 22 ページ２００１年１１月２８日　水曜日　午前１１時１２分 Making Double-Sided Copy (1 s s s s 2, 2 s s s s 2) (continued) Select the original set direction. Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Orig- inal popup menu, then touch the desired original direction key to highlight it. Touch OK to return to the Basic Screen.
Page 81 Making Double-Sided Copy (1s s s s 2, 2s s s s 2) (continued) Select additional copy conditions, as desired. FOR DETAILS Some incompatible conditions may automatically release the selected copy mode. In this case, arrange all the settings to be compatible with the selected copy mode.
Page 82: Using Platen Glass
7155e032v1.fm 24 ページ２００１年１１月２８日　水曜日　午前１１時１２分 Making Double-Sided Copy (1 s s s s 2, 2 s s s s 2) (continued) Using Platen Glass Use the platen glass to scan originals unsuitable for the document feeder. >>>Speciﬁcation for Double-Sided Copying Using Platen Glass<<< ❒...
Page 83 Making Double-Sided Copy (1 s s s s 2, 2 s s s s 2) (continued) FOR DETAILS Selecting TOP BIND will make copies upside down on the reverse side, while RIGHT&LEFT BIND copies normally. Touch OK to return to the Basic Screen. Copying Position original FACE DOWN on the platen glass according to the Operations...
Page 84 7155e032v1.fm 26 ページ２００１年１１月２８日　水曜日　午前１１時１２分 Making Double-Sided Copy (1 s s s s 2, 2 s s s s 2) (continued) Press [ START ] to scan. The front side image of the double-sided copy will be scanned into memory. Replace the original on the platen glass with the back side image original, then press [ START ].
Page 85: Making Single-Sided Copy From Double-Sided Originals (2 S 1)
Making Single-Sided Copy from Double-Sided Originals (2 s s s s 1) Use RADF and select 2 s 1 copy mode to make single-sided copies from double-sided originals. Front Front Back Front Front Back Copying Front Operations Front Back 2-1 Copying Front Front Back...
Page 86 7155e032v1.fm 28 ページ２００１年１１月２８日　水曜日　午前１１時１２分 Making Single-Sided Copy from Double-Sided Originals (2 s s s s 1) (continued) Select additional copy conditions, as desired. FOR DETAILS Some incompatible conditions may automatically release the selected copy mode. In this case, arrange all the settings to be compatible with the selected copy mode.
Page 87: Copying Using Special Paper (Multi-Sheet Bypass Tray)
Copying Using Special Paper (Multi-Sheet Bypass Tray) Use the Multi-sheet bypass tray to copy using special (non-standard) paper. Specify the paper type and size to be loaded on the Multi-sheet bypass tray, as described below. HINT When loading special paper in the main body tray or in the LCT to use it on a regular basis, the paper type and size should be speciﬁed in the Copying Key Operator setting.
Page 88 7155e032v1.fm 30 ページ２００１年１１月２８日　水曜日　午前１１時１２分 Copying Using Special Paper (Multi-Sheet Bypass Tray) (continued) FOR DETAILS When selecting Tab paper , AMS is automatically selected. The STD size (special) and Non STD size cannot be selected, and the loaded copy paper cannot be fed in 1 s 2 or 2 s 2 copying. Specify the paper size.
Page 89 Copying Using Special Paper (Multi-Sheet Bypass Tray) (continued) Copying Operations Positioning Originals Setting Print Quantity Set Job During Warmup Stop Scan/Print Paper Size Lens Mode Density When Wide size paper is highlighted, the popup menu will appear. Use arrow keys to scroll to the desired wide size, then specify the precise 1s1, 2s2 dimensions of paper to be used, following the procedure below.
Page 90 7155e032v1.fm 32 ページ２００１年１１月２８日　水曜日　午前１１時１２分 Copying Using Special Paper (Multi-Sheet Bypass Tray) (continued) Enter the desired print quantity from the control panel keypad. HINT See p. 3-6 for details on setting print quantity. Position original(s) FACE UP in the document feeder or FACE DOWN on the platen glass.
Page 91: Copying Using Memory
Copying Using Memory This section describes various copying features available on this machine using built-in memory. To Scan Originals into Memory (Store Mode) Store mode allows you to scan all the originals ﬁrst, then to start continuous Copying Operations printing job. Positioning Originals Use RADF store mode for scanning large amount of originals.
Page 92 EXIT on the conﬁrmation screen to be sure the data is deleted. HINT Should memory overﬂow occur frequently, it is recommended that you contact your Konica service representative to extend the memory capacity in your machine. Touch STORE to exit the Store mode.
Page 93: To Set Next Copying Job (Reserve)
Copying Using Memory (continued) To Set Next Copying Job (Reserve) The Reserve function allows you to set up a new job while a current (scan/ print) job is in process. When the current job is ﬁnished, the Reserve job starts printing immediately. >>>Speciﬁcations for Reserve<<<...
Page 94 7155e032v1.fm 36 ページ２００１年１１月２８日　水曜日　午前１１時１２分 Copying Using Memory (continued) Position original(s) after completing the scan for the current job. HINT See p. 3-2 to p. 3-5 for details on positioning originals. Press [ START ] to start scanning for the reserve job. When completed, the Basic Screen for the current printing job will be restored.
Page 95: To Check/Control Jobs In Progress (Job Status Screen)
Copying Using Memory (continued) To Check/Control Jobs in Progress (Job Status Screen) The Job Status Screen allows you to perform the following functions. • Conﬁrm machine status • Change order of reserve job • Delete reserve job • View previous job list •...
Page 96: Contents Of Job Status Screen
7155e032v1.fm 38 ページ２００１年１１月２８日　水曜日　午前１１時１２分 Copying Using Memory (continued) To display previous job list: Touch PREVIOUS JOB LIST to display the Previous Job List Screen. Touch to scroll to the next page. Up to 16 previous jobs (4 pages) can be displayed. Touch to return to the previous page.
Page 97 Copying Using Memory (continued) PAGE(s) LEFT: Displays the remaining copy count of the job. 0 to 9999 (The number exceeding 9999 will be displayed as 9999^.) Copy count = No. of scanned pages x Print quantity MINUTE(s) TO GO: Displays the time (in minutes) required for completing the job. Exceeding 999 minutes: 999^ Copying Operations...
Page 98: Output Mode For Machine Without Finisher
7155e033v1.fm 40 ページ２００１年１１月２８日　水曜日　午前１１時１５分 Output Mode for Machine without Finisher This section describes the output modes for a copier without the Finisher. The Non-sort mode is initially selected. q Non-sort mode copies the original set in amounts determined by the print quantity setting, then outputs sorted sets normally.
Page 99: Mode
Output Mode for Machine without Finisher (continued) When using Rotation sort or Rotation group mode, load the same paper size into two trays in different orientation. HINT Non-sort mode is initially selected. Key Operator can change the initial output mode. See p. 13-10. Copying Operations Select the desired output mode.
Page 100 7155e033v1.fm 42 ページ２００１年１１月２８日　水曜日　午前１１時１５分 Output Mode for Machine without Finisher (continued) (3) Touch OK . The Basic Screen will be restored, with OUTPUT MENU highlighted. Select additional copy conditions, as desired. Enter the desired print quantity from the control panel keypad. HINTS •...
Page 101: Output Mode For Machine With Finisher
Output Mode for Machine with Finisher Finisher FS-110/210 is equipped with a primary (main) and a secondary (sub) exit trays. Without using any optional equipment, each exit tray provides the output modes as described below. Primay (Main) Tray: q Non-sort mode simply means that the offset-stacker ﬁnisher modes are Copying not selected.
Page 102 7155e033v1.fm 44 ページ２００１年１１月２８日　水曜日　午前１１時１５分 Output Mode for Machine with Finisher (continued) Secondary (Sub) Tray: q Face down non-sort exit outputs simplex copies and odd numbered duplex copies face down, without offsetting the sorted sets. w Face down group exit outputs multiple copies of each original face down, without offsetting the grouped sets upon exit.
Page 103 Output Mode for Machine with Finisher (continued) ❒ Incompatible with Group mode: 1 s 2 or 2 s 2 mode using platen glass (unless Platen store mode is used), Proof Copy, Fold, Stitch & Fold, Three- Fold, Sheet/Cover Insertion, Chapter, Combination, Booklet, OHP Interleave, Image Insert, Repeat ❒...
Page 104 7155e033v1.fm 46 ページ２００１年１１月２８日　水曜日　午前１１時１５分 Output Mode for Machine with Finisher (continued) To set Staple-sort mode: (1) Touch STAPLE SORT on the Basic Screen to highlight it. The staple position icon will be displayed in the output icon area. (2) Touch OUTPUT MENU on the Basic Screen to display the Output Mode popup menu.
Page 105 Output Mode for Machine with Finisher (continued) (4) Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Original popup menu. Copying Operations Positioning Originals Setting Print Quantity Set Job During (5) Touch the desired original set direction key, then touch OK to return to the Warmup Basic Screen.
Page 106 7155e033v1.fm 48 ページ２００１年１１月２８日　水曜日　午前１１時１５分 Output Mode for Machine with Finisher (continued) Touch OK to restore the Basic Screen. OUTPUT MENU will be highlighted, and the output icon of the selected output mode will be displayed in the output icon area. Select additional copy conditions, as desired.
Page 107: Selecting Binding Mode
Selecting Binding Mode When copying in 1 s 2 or 2 s 2 mode, specify the binding mode on the Out- put Mode popup menu to obtain the desired copy result. Right & Left bind: Normal duplex copies Top bind: Duplex copies arranged upside down on the reverse side Copying Binding mode Copies...
Page 108: Recalling Previous Job Settings
7155e033v1.fm 50 ページ２００１年１１月２８日　水曜日　午前１１時１５分 Recalling Previous Job Settings Follow the procedure below to copy with a previous job’s settings. FOR DETAILS • Only the last-completed output job settings can be recalled as the previous job settings. Non-complete job or reserve job settings cannot be recalled, even if the setting operations have been made last.
Page 109: Checking Feature Selections And Proof Copying
Checking Feature Selections and Proof Copying Use the Check mode to conﬁrm copying selections before starting print operation. In this mode, use Proof copy to produce a sample of the copied set before making multiple copies. This is a convenient and cost effective way of viewing the results of the following copying selections.
Page 110 7155e033v1.fm 52 ページ２００１年１１月２８日　水曜日　午前１１時１５分 Checking Feature Selections and Proof Copying (continued) Verify the settings made for the current job. • When settings are OK, proceed to step 8 . • When a set of sample copy is needed, proceed to step 6 . •...
Page 111 Checking Feature Selections and Proof Copying (continued) To release the settings: Touch the desired copying condition key on the Check Screen to highlight it, then touch RELEASE SETTING . Copying Operations Positioning Originals Setting Print Quantity Set Job During Warmup Stop The conﬁrmation screen will appear on the Check Screen.
Page 112 7155e033v1.fm 54 ページ２００１年１１月２８日　水曜日　午前１１時１５分 Checking Feature Selections and Proof Copying (continued) Change the print quantity, as required. FOR DETAILS Proof copy can be performed as needed, until the print quantity amount on the Basic Screen reaches zero. (Note that the print quantity amount on the Check Screen does not change.) If required, change the print quantity on the Basic Screen.
Page 113: Interrupt Copying
Interrupt Copying Use the Interrupt mode to interrupt copying in progress to perform a simple job. When interrupt copying is completed, the settings for the initial job restore automatically and the Basic Screen displays. Interrupt copying is available when the copier is performing the following operations: •...
Page 114 7155e033v1.fm 56 ページ２００１年１１月２８日　水曜日　午前１１時１５分 Interrupt Copying (continued) Set copy conditions, as desired. The initial settings in Interrupt mode are as follows. : 1 s 1 Copy Mode RADF : ON : ON Lens Mode : 1.00 (100%) : ON Print Quantity : 1 Finisher : Main Tray in Sort mode FOR DETAILS...
Page 115 Interrupt Copying (continued) FOR DETAILS For particular jobs in progress, copying will cease only after certain phases of the immediate operation are completed, as indicated by the [INTERRUPT] LED conditions described below. • Collectively printing image stored in memory The LED blinks until one set of the current job is printed. Copying Operations Then the LED remains steady for the temporary job performed in...
Page 116 7155e033v1.fm 58 ページ２００１年１１月２８日　水曜日　午前１１時１５分...
Page 117: Job Memory
Job Memory J ob Memory &Help Mode & Help Mode Job Memory How to Use Helpful Functions Help Mode toring Job Conditions (Job Memory: Job Store) ......4-2 ecalling Stored Job Settings (Job Memory: Job Recall).... 4-5 isplaying Screen for Operation Guide (Help Mode)....... 4-6...
Page 118: Storing Job Conditions (Job Memory: Job Store)
7155e04v1.fm 2 ページ２００１年１１月２７日　火曜日　午後３時５６分 Storing Job Conditions (Job Memory: Job Store) Use Job Store to store up to 30 frequently used copy job settings, which can be recalled at any time. The stored jobs can be given alphabetical names. >>>Speciﬁcations for Job Memory<<< ❒...
Page 119 Storing Job Conditions (Job Memory: Job Store) (continued) Review the settings on the Job Store Check Screen. J ob Memory &Help Mode Check that the selections made in step 1 are correctly entered. Job Memory FOR DETAILS Help Mode If any correction is required, touch CANCEL to return to the Basic Screen.
Page 120 7155e04v1.fm 4 ページ２００１年１１月２７日　火曜日　午後３時５６分 Storing Job Conditions (Job Memory: Job Store) (continued) FOR DETAILS If you wish to cancel the job number selection, touch CANCEL to restore the Basic Screen, which displays the settings made in step 1 . If you wish to cancel the settings, press [ AUTO RESET ]. Touch OK .
Page 121: Recalling Stored Job Settings (Job Memory: Job Recall)
Recalling Stored Job Settings (Job Memory: Job Recall) Use Job Recall to recall jobs that are already stored in Job Memory. Press [ JOB MEMORY ] on the control panel. The Job No. Selection Screen will be displayed. Touch to highlight a job number key to select a job you want to recall.
Page 122: Displaying Screen For Operation Guide (Help Mode)
7155e04v1.fm 6 ページ２００１年１１月２７日　火曜日　午後３時５６分 Displaying Screen for Operation Guide (Help Mode) The Help Screen provides you with the information about the current screen mode and about setting procedures. Help mode can be accessed from any screen except Job Memory and Key Operator Screens. Help mode provides two types of Help Screen according to the current screen mode: q Help Screen accessed from Basic Screen...
Page 123 Displaying Screen for Operation Guide (Help Mode) (continued) • PANEL CONTRAST displays the screen to adjust the contrast of the LCD panel. • WEEKLY TIMER provides the current setting information of Weekly Timer. This key appears when the Weekly Timer function is turned ON. •...
Page 124: To Display Help Screen From Other Screens
7155e04v1.fm 8 ページ２００１年１１月２７日　火曜日　午後３時５６分 Displaying Screen for Operation Guide (Help Mode) (continued) To Display Help Screen from Other Screens While in any screen other than the Basic Screen, press [ HELP ]. COPY SCAN / SERVER PRINT CHECK HELP JOB MEMORY AUTO RESET COUNTER CLEAR QTY...
Page 125 Troubleshooting How to Handle Machine Troubles T rouble- shooting hen “Call for Service” Message Is Displayed........ 5-2 Call for Service reventive Maintenance............... 5-4 Preventive Maintenance learing Mishandled Paper ............. 5-6 Clearing Mishandled Paper hen “JAM” Appears on “SCAN” Or “PRINT” Key....... 5-8 JAM Key hen “ADD PAPER”...
Page 126: When "Call For Service" Message Is Displayed
7155e05v1.fm 2 ページ２００１年１１月２７日　火曜日　午後３時５８分 When “Call for Service” Message Is Displayed A “Call for Service” message indicates a machine condition that requires the attention of your service representative. The Call for Service Screen usually displays the telephone and facsimile numbers of your service representative. CAUTION When the Call for Service Screen is displayed, be sure to con- tact your service representative immediately by following the...
Page 127: Limited Use Of The Copier In Trouble
When “Call for Service” Message Is Displayed (continued) Unplug the machine. Contact your service representative and report the condition and code No. Limited Use of the Copier in Trouble If the message shown below is displayed on the Call for Service Screen, you may continue operating the copier on a limited function basis and utilize the trays and ADU that are not affected by the trouble.
Page 128: Preventive Maintenance
7155e05v1.fm 4 ページ２００１年１１月２７日　火曜日　午後３時５８分 Preventive Maintenance After a set number of copies have been made on your copier, Preventive Maintenance (PM) will be required for maintaining optimal performance. When preventive maintenance is due, a message and an icon ( will prompt you to contact your service representative for maintenance. To Check the PM Counter Follow the procedure below to check the PM counter to estimate the time when Preventive Maintenance is due.
Page 129: Preventive Maintenance
Preventive Maintenance (continued) The PM counter will appear under the Printer counter on the screen. HINT To print the Counter list including the PM counter, see p. 12-13. Touch EXIT . T rouble- shooting The Basic Screen will be restored. Call for Service Preventive...
Page 130: Clearing Mishandled Paper
7155e05v1.fm 6 ページ２００１年１１月２７日　火曜日　午後３時５８分 Clearing Mishandled Paper When a paper misfeed occurs, the copier stops making copies and mishandled paper codes display on the screen to indicate misfeed area(s). Copying operation cannot be continued until all the misfeed locations are cleared.
Page 131: Clearing Mishandled Paper
Clearing Mishandled Paper (continued) When completed, the Basic Screen will be restored. If any misfeed location is left, the screen displays the next disposal procedure in the message area and the location number in the jam position display. Repeat steps 1 to 2 until all the locations are cleared. WARNING The drum unit generates high voltage.
Page 132: When "Jam" Appears On "Scan" Or "Print" Key
7155e05v1.fm 8 ページ２００１年１１月２７日　火曜日　午後３時５８分 When “JAM” Appears on “SCAN” Or “PRINT” Key If a misfeed occurs with the print/scan job in progress while you are setting a reserve job, SCAN or PRINT JOB folder key on the Basic Screen will change to ﬂashing JAM JOB .
Page 133: Jam Key
When “JAM” Appears on “SCAN” Or “PRINT” Key (continued) Touch FREE JOB to continue the reserve job setting. WARNING The drum unit generates high voltage. To avoid bodily electrical shock, NEVER TOUCH the area. CAUTION The internal ﬁxing unit is very hot. To avoid getting burned, DO NOT TOUCH.
Page 134: When "Add Paper" Appears On "Print" Key
7155e05v1.fm 10 ページ２００１年１１月２７日　火曜日　午後３時５８分 When “ADD PAPER” Appears on “PRINT” Key If the paper supply for a print job in progress becomes depleted while you are setting a reserve job, PRINT JOB on the Basic Screen will change to ﬂashing ADD PAPER . Follow the procedure below to continue the copying operation.
Page 135: When "Memory Full" Message Is Displayed (Memory Overﬂow)
When “Memory Full” Message Is Displayed (Memory Overﬂow) In certain modes, this printer/copier uses memory to make operations convenient and smooth ﬂowing. Occasional memory overﬂow may occur if the installed memory is inadequate for the copy conditions selected. To handle the Memory overﬂow condition while in a job, take the appropriate action described below.
Page 136: Memory Overﬂow In Reserve Job
7155e05v1.fm 12 ページ２００１年１１月２７日　火曜日　午後３時５８分 When “Memory Full” Message Is Displayed (Memory Overﬂow) (continued) Memory Overﬂow in Reserve Job When memory overﬂow occurs during the reserve operation, CONTINUE also appears on the active screen. In this case, the machine will not stop until all the jobs on standby for printing are completed.
Page 137: When Power Off/On Screen Is Displayed
When Power OFF/ON Screen Is Displayed When any trouble affects the electric signal of the copier, the Power OFF/ON Screen will be displayed. Follow the procedure below to turn the machine power off then on. T rouble- Turn OFF the power switch. shooting Call for Service...
Page 138: Troubleshooting Tips
7155e05v1.fm 14 ページ２００１年１１月２７日　火曜日　午後３時５８分 Troubleshooting Tips COPIER DOES NOT OPERATE WHEN POWER SWITCH IS ON Fully insert paper trays. Close RADF. Close Front doors of main body. Close Finisher door. Check to be sure main power switch is ON. Check to be sure power plug is ﬁrmly inserted in electrical socket. COPY IMAGE IS TOO LIGHT Manually adjust copy density to darker density.
Page 139: Copying Hints
Troubleshooting Tips (continued) COPYING DOES NOT RESUME AFTER MISHANDLED PAPER IS REMOVED Check copier diagram on touch screen for additional indications of mishandled paper. COPY QUALITY IS POOR Check paper for dampness, and replace it if necessary. THE ORIGINAL PAPER IS MISHANDLED OR SKEWED IN THE DOCUMENT FEEDER Originals should conform to the recommended size and weight.
Page 140 7155e05v1.fm 16 ページ２００１年１１月２７日　火曜日　午後３時５８分 Troubleshooting Tips (continued) THE BASIC SCREEN DOES NOT DISPLAY SETTINGS AS DESCRIBED IN INSTRUCTION MANUAL Check with the Key Operator, as Initial Settings may have been changed. “PLEASE CHECK ORIGINAL” This message displays when the copier detects a non-standard paper size on the platen glass.
Page 141: Machine Specifications
Machine Speciﬁcations Main Body & Option Speciﬁcations ain Body Speciﬁcations..............6-2 ption Speciﬁcations ..............6-4 Machine Specifications...
Page 142: Main Body Speciﬁcations
Multi-sheet bypass tray; 100 sheets (80 g/m Warm-up time: Approximately 5.5 minutes (7155) / 6.0 minutes (7165) First copy time: Approx. 3.4 seconds (A4) (7155) / 3.1 seconds (A4) (7165) Power: AC 230V/50Hz (This equipment selects the correct voltage automatically.) Power consumption: 2.1KW max.
Page 143: Radf (Df-316)
Main Body Speciﬁcations (continued) Effective size*: 847(W) x 760(D) mm (main body + RADF) 1821(W) x 760(D) mm (main body + RADF + FS-110/210 + LT-402) *: Effective size is the dimensions required when the Multi-sheet bypass tray is opened. RADF (DF-316) Function: Feeds 1- and 2-sided originals automatically...
Page 144: Option Speciﬁcations
7155e06v1.fm 4 ページ２００１年１１月２７日　火曜日　午後４時０分 Option Speciﬁcations FS-110/210 In-Bin Stapler Finisher Type: Offset catch tray Sorting system: Sorting by shifting (approx. 30mm) Paper size: A3, B4, F4, A4R, A4, B5R, B5, A5, A5R, B6, 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5" * A4R / 8.5"x11"R only in Three-Fold mode Secondary (sub) tray is also available for exiting Non STD size paper.
Page 145: Large Capacity Tray
Option Speciﬁcations (continued) LT-402 Large Capacity Tray Function: Paper feed into main body Capacity: 4,000 sheets (80g/m paper) Paper type: Plain/Recycled (60 to 90g/m Thick (91 to 200g/m Paper size: A4, B5, 8.5"x11", Wide size (314mm x 223mm) Dimensions: 430(W) x 639(D) x 690(H) mm Weight: Approx.
Page 146 7155e06v1.fm 6 ページ２００１年１１月２７日　火曜日　午後４時０分...
Page 147: A Dvanced Information
Safety Information Advanced Machine Information Copying Operations Job Memory &Help Mode Trouble- shooting Machine Specifications Advanced Information Special Original Applications Server Function Paper & Original Info Maintenance & Supplies Key Operator Mode...
Page 148 7155eindexv1.fm -ii ページ２００１年１１月２８日　水曜日　午後１２時０分...
Page 149 Weekly Timer Rotation Vertical/Hori- zontal Zoom Fold / Advanced Information Stitch&Fold Punch How to Use Advanced Functions Three-Fold Cover Sheet rogrammed Shut-Off (Weekly Timer)..........7-2 Feeding Using Finisher otation ..................7-5 Manually Tandem Mode ertical/Horizontal Zoom Mode............7-6 aking Folded Booklet (Fold / Stitch&Fold)......... 7-9 A dvanced unching File Holes in Copies (Punch) .........
Page 150: Programmed Shut-Off (Weekly Timer)
7155e07v1.fm 2 ページ２００１年１１月２８日　水曜日　午後５時３３分 Programmed Shut-Off (Weekly Timer) The Weekly Timer function manages a copier to be turned on and off at the time speciﬁed by the Key Operator to disable copying during off time. This function is not factory-set. When a copier is under control of the Weekly Timer function, the TIMER indicator on the right side of the control panel is lit.
Page 151: Using Finisher
Programmed Shut-Off (Weekly Timer) (continued) The Timer Interrupt password is not factory set and must be entered by the Key Operator. In the event the Timer Interrupt password has not been entered by the Key Operator, the following message will display instead. Weekly Input copy time Timer...
Page 152 7155e07v1.fm 4 ページ２００１年１１月２８日　水曜日　午後５時３３分 Programmed Shut-Off (Weekly Timer) (continued) When Timer Interrupt of the copier is ﬁnished, press [ POWER SAVER ON/OFF ] for one second or longer, then release it. The copier returns to the OFF condition and copying is again disabled.
Page 153: Rotation
Rotation This function allows you to utilize APS or AMS and copy the original documents onto size A4 or B5, irrespective of the copy paper feeding direction. FOR DETAILS Weekly Timer By default, Rotation requires APS or AMS to function. The Key Operator can set this function ON, or to operate when APS, AMS or reduce Rotation functions.
Page 154: Vertical/Horizontal Zoom Mode
7155e07v1.fm 6 ページ２００１年１１月２８日　水曜日　午後５時３３分 Vertical/Horizontal Zoom Mode Use the Vertical/Horizontal zoom mode to reduce or enlarge vertical and horizontal dimensions, independently. >>>Vertical/Horizontal Zoom Mode Speciﬁcations<<< ❒ Vertical/Horizontal zoom range: 0.25~4.00 ❒ Incompatible Conditions: APS, AMS, Reduce & Shift in Image Shift, Overlay with Repeat The ﬁgure shown below is the sample image using the Vertical/Horizontal zoom.
Page 155 Vertical/Horizontal Zoom Mode (continued) Touch Vert. on the popup menu to highlight it, then set the vertical zoom ratio. Weekly Timer Rotation Vertical/Hori- zontal Zoom Fold / Stitch&Fold Punch Use the keypad on the popup menu to enter a 3-digit vertical zoom ratio, or use arrow keys ( ▲...
Page 156 7155e07v1.fm 8 ページ２００１年１１月２８日　水曜日　午後５時３３分 Vertical/Horizontal Zoom Mode (continued) FOR DETAILS The ﬁgure shown below is the sample image using the Vertical/ Horizontal zoom with an original placed slantwise on the platen glass. 30° Length: 0.50, Width: 2.00 Length: 2.00, Width: 0.50 30°...
Page 157: Making Folded Booklet (Fold / Stitch&Fold)
Making Folded Booklet (Fold / Stitch&Fold) The Fold and Stitch & Fold modes are available only when the FS-210 Finisher option is installed. When either mode is selected, the Booklet feature is automatically selected and indicated on the Application Selection Screen.
Page 158 7155e07v1.fm 10 ページ２００１年１１月２８日　水曜日　午後５時３３分 Making Folded Booklet (Fold / Stitch&Fold) (continued) Fold Stitch & Fold 20 sheets max. 3 sheets max. 19 sheets max. when using thick cover paper Touch OUTPUT MENU on the Basic Screen The Output Mode popup menu will be displayed. Touch MAIN TRAY , if not highlighted.
Page 159 Making Folded Booklet (Fold / Stitch&Fold) (continued) Touch OK on the Output Mode popup menu. The Basic Screen will be restored and the selection made in the output mode will be reﬂected in the OUTPUT icon area. Select additional copying features, as required. Weekly Timer Rotation...
Page 160: Punching File Holes In Copies (Punch)
7155e07v1.fm 12 ページ２００１年１１月２８日　水曜日　午後５時３３分 Punching File Holes in Copies (Punch) The Punch mode is available only when the PK-110 Punching kit option is installed on the FS-110/FS-210 Finisher. When the Punch mode is selected in combination with any of the Primary (Main) tray output modes, each copied sheet is punched and output to the Primary tray according to the selected output mode.
Page 161 Punching File Holes in Copies (Punch) (continued) Touch OUTPUT MENU on the Basic Screen The Output Mode popup menu will be displayed. Touch MAIN TRAY , if not highlighted. Weekly Timer Rotation Vertical/Hori- zontal Zoom Fold / Stitch&Fold Punch Three-Fold Cover Sheet Touch PUNCH .
Page 162 7155e07v1.fm 14 ページ２００１年１１月２８日　水曜日　午後５時３３分 Punching File Holes in Copies (Punch) (continued) Specify the original set direction. Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Orig- inal popup menu. Touch to select the desired original set direction, then touch OK to return to the Basic Screen.
Page 163: Output Three-Folded Copies (Three-Fold)
Output Three-Folded Copies (Three-Fold) The Three-Fold mode is available only when the FS-210 Finisher option is installed. In this mode, the original image is copied on A4R/8.5"x11"R copy paper and output to the Booklet tray of the Finisher. >>>Speciﬁcations for Three-Fold Mode<<< Weekly Timer ❒...
Page 164 7155e07v1.fm 16 ページ２００１年１１月２８日　水曜日　午後５時３３分 Output Three-Folded Copies (Three-Fold) (continued) Touch THREE-FOLD to highlight it. Touch OK on the Output Mode popup menu to complete the setting and return to the Basic Screen. The THREE-FOLD icon will be displayed in the OUTPUT icon area. Select additional copying features, as required.
Page 165: Cover Sheet Feeding
Cover Sheet Feeding The Cover Sheet Feeder (PI-110) is available as an option on the FS-110/ 210 Finisher. Load cover sheet paper into this device and use the sheets as front covers for copied sets output to the Main tray or use the sheets as booklet-type covers for copied sets output to the Booklet tray in the Fold, Stitch &...
Page 166 7155e07v1.fm 18 ページ２００１年１１月２８日　水曜日　午後５時３３分 Cover Sheet Feeding (continued) Touch MAIN TRAY , if not highlighted. Touch COVER SHEET . The Cover Sheet Mode Selection Screen will be displayed. Touch FRONT , FRONT+BACK , or BACK to highlight it, then select the covers tray.
Page 167 Cover Sheet Feeding (continued) Touch OK on the Output Mode popup menu. The Basic Screen will be restored. Select additional copying features, as required. Weekly Timer Load the cover sheet paper into the optional cover sheet feeder of Rotation the FS-110/210 Finisher. Vertical/Hori- If the paper size loaded in the cover sheet zontal Zoom...
Page 168: Using Finisher Manually
7155e07v1.fm 20 ページ２００１年１１月２８日　水曜日　午後５時３３分 Using Finisher Manually This function is available only with the Cover Sheet Feeder option (PI-110) installed on the FS-110/210 Finisher. To use this convenient function, simply place a set of paper into the lower tray of the cover sheet feeder, select the desired mode from the Manual Finishing operation panel located on the top of the Finisher, then press the Start/Stop button.
Page 169 Using Finisher Manually (continued) >>>Speciﬁcations for Manual Stitch & Fold mode<<< ❒ Paper size: A3, B4, A4R, 11"x17", 8.5"x14", 8.5"x11"R ❒ Paper weight: 60~200g/m ❒ Staple capacity: 20 sheets max. (80g/m paper) 19 sheets max. (80g/m paper with a thick paper cover) ❒...
Page 170 7155e07v1.fm 22 ページ２００１年１１月２８日　水曜日　午後５時３３分 Using Finisher Manually (continued) Press Staple Mode Selection button and/or Punch button to select the desired mode. Start/Stop button Staple Mode Selection button Punch button FOR DETAILS Punch mode is compatible with 1 oblique staple, 2 parallel staples, or Stitch &...
Page 171: Using Two Copiers In Tandem
❒ The combination of the two copiers can be either the same models (two Cover Sheet 7155 copiers or two 7165 copiers) or different models (7155 and 7165). Feeding ❒ Two copiers should have the same optional conﬁguration except for the...
Page 172 7155e07v1.fm 24 ページ２００１年１１月２８日　水曜日　午後５時３３分 Using Two Copiers in Tandem (continued) ❒ The 7155/7165 is provided with an Allocation recovery mode, which functions when trouble occurs in either the primary or secondary copier to allow the trouble-free copier to complete the job.
Page 173 Using Two Copiers in Tandem (continued) FOR DETAILS The Sub icon will display on the Basic Screen of the secondary copier when [START] is pressed on the primary copier to start the tandem printing operation. Weekly Timer FOR DETAILS Rotation The tandem mode cannot be selected/continued in the cases shown below.
Page 174 7155e07v1.fm 26 ページ２００１年１１月２８日　水曜日　午後５時３３分 Using Two Copiers in Tandem (continued) Position original(s) FACE UP in the document feeder or FACE DOWN on the platen glass of the primary copier. HINT See p. 3-2 to p. 3-5 for details on positioning originals. Press [ START ] on the control panel of the primary copier.
Page 175: To Stop Scanning/Printing
Using Two Copiers in Tandem (continued) To Stop Scanning/Printing To cancel the tandem copying job: Press [ STOP ] on the control panel of the primary copier. Weekly The scanning/printing job stops immediately, and the popup menu appears Timer on the Basic Screen of the primary copier to ask you whether to continue or Rotation terminate the job.
Page 176: Troubleshooting
7155e07v1.fm 28 ページ２００１年１１月２８日　水曜日　午後５時３３分 Using Two Copiers in Tandem (continued) Troubleshooting Copying with the Allocation recovery mode: The Allocation recovery mode enables you to complete your copying job even when trouble occurs in either the primary or secondary copier, such as a paper jam.
Page 177: Special Original
Special Original How to Make a Copy of Special Original pecifying Original Direction............8-2 Original Direction aking Copy Quality Closer to Originals (Text/Photo Enhance)..8-4 Text/Photo Enhance opying Mixed Size Originals (Mixed Original)......8-6 Mixed Original opying Z-Folded Originals (Z-Folded Original) ......8-8 Z-Folded Original Original...
Page 178: Specifying Original Direction
7155e08v1.fm 2 ページ２００１年１１月２７日　火曜日　午後４時１０分 Specifying Original Direction Specify the direction of the originals placed on RADF or platen glass. This setting is required to obtain copy results as expected when making double-sided copies with binding position speciﬁed or when staple position is speciﬁed.
Page 179: Original Direction
Specifying Original Direction (continued) Touch OK to complete the setting and return to the Basic Screen. The SPECIAL ORIGINAL key on the Basic Screen is highlighted, and the icon in the message area indicates the selected original direction. Make other compatible selections. Original Direction Enter the desired print quantity from the control panel keypad.
Page 180: Making Copy Quality Closer To Originals (Text/Photo Enhance)
7155e08v1.fm 4 ページ２００１年１１月２７日　火曜日　午後４時１０分 Making Copy Quality Closer to Originals (Text/Photo Enhance) Use this function to enhance the reproducibility of half tones so that the copy quality more closely matches to that of the original. Text Mode Use the Text mode when copying a text original. In this mode, text is improved in comparison to using the general mode.
Page 181: Text/Photo Enhance
Making Copy Quality Closer to Originals (Text/Photo Enhance) (continued) Touch Text Photo , or Increase Contrast , as required. Touch OK to return to the Basic Screen. Select additional copying features, as desired. Original Enter the desired print quantity from the control panel keypad. Direction Text/Photo Enhance...
Page 182: Copying Mixed Size Originals (Mixed Original)
7155e08v1.fm 6 ページ２００１年１１月２７日　火曜日　午後４時１０分 Copying Mixed Size Originals (Mixed Original) Use the Mixed original mode with the document feeder or with Store mode to copy mixed size originals. Each original in the mixed set will be copied to paper of the same size (APS mode) or to paper of desired size with appropriate ratio automatically selected (AMS mode).
Page 183: Mixed Original
Copying Mixed Size Originals (Mixed Original) (continued) Touch Mixed Original . Touch OK to return to the Basic Screen. Select additional copying features, as desired. Original Direction FOR DETAILS Text/Photo APS is automatically selected on the Basic Screen. Enhance To select AMS, touch the tray key on the Basic Screen to select the Mixed desired paper size.
Page 184: Copying Z-Folded Original (Z-Folded Original)
7155e08v1.fm 8 ページ２００１年１１月２７日　火曜日　午後４時１０分 Copying Z-Folded Originals (Z-Folded Original) Use the Z-folded original mode with the document feeder to copy Z-folded originals. Otherwise, the size detection sensor of the RADF may function incorrectly. This mode requires more scanning time to detect the original size. >>>Speciﬁcations of Z-Folded Original<<<...
Page 185 Copying Z-Folded Originals (Z-Folded Original) (continued) Enter the desired print quantity from the control panel keypad. HINT See p. 3-6 for details on setting print quantity. Position mixed original(s) FACE UP in the document feeder. HINTS • See p. 3-4 for details on positioning originals. •...
Page 186: Copying Non-Standard Size Originals (Original Form)
7155e08v1.fm 10 ページ２００１年１１月２７日　火曜日　午後４時１０分 Copying Non-Standard Size Originals (Original Form) The copier usually detects the standard size of originals fed through RADF or positioned on the platen glass (STD size mode). Use Non STD size mode to specify the scanning area manually for copying or printing special size originals.
Page 187: Original Form
Copying Non-Standard Size Originals (Original Form) (continued) Touch the desired size key. FOR DETAILS When selecting FULL AREA on the Non STD size mode menu, the copier scans the whole area of the platen glass and copies with the paper size or magniﬁcation ratio currently selected. Touch OK on the popup menu to complete the setting.
Page 188 7155e08v1.fm 12 ページ２００１年１１月２７日　火曜日　午後４時１０分...
Page 189 Application Selection Screen Applications Sheet/Cover Insertion Chapter How to Use Application Functions Combination o Display Application Selection Screen.......... 9-2 Booklet nserting Sheets and Covers (Sheet/Cover Insertion)....9-3 ocating Title Pages on the Right Side (Chapter)......9-7 Interleave ay Out Several Pages onto One Sheet (Combination) .... 9-10 Image Insert aking a Multiple Page Signature Booklet (Booklet).....
Page 190: To Display Application Selection Screen
7155e091v1.fm 2 ページ２００１年１１月２８日　水曜日　午前１１時３１分 To Display Application Selection Screen Follow the procedure below to display the Application Selection Screen and select the desired copying features. Touch APPLICATION on the Basic Screen. The Application Selection Screen will be displayed on the touch panel. FOR DETAILS •...
Page 191: Inserting Sheets And Covers (Sheet/Cover Insertion)
Inserting Sheets and Covers (Sheet/Cover Insertion) Use Sheet/Cover Insertion in copy mode or blank mode to insert chapter sheets or separator sheets into the ﬁnished set, as well as front and back covers. >>>Speciﬁcations for Sheet/Cover Insertion<<< ❒ Use RADF. ❒...
Page 192 7155e091v1.fm 4 ページ２００１年１１月２８日　水曜日　午前１１時３１分 Inserting Sheets and Covers (Sheet/Cover Insertion) (continued) Load regular sheets into any tray, and insertion sheets and covers into each tray source to be designated on the Sheet/Cover Inser- tion Screen. FOR DETAILS • When using thick paper or tabbed paper for covers or insertions, load them in the Multi-sheet bypass tray, unless previously speciﬁed and loaded in any other tray.
Page 193 Inserting Sheets and Covers (Sheet/Cover Insertion) (continued) Touch CHANGE COVERS TRAY to select the cover sheet tray source. The tray source for covers currently selected is displayed on the Sheet/Cover Insertion Screen. Every touch of the key shifts the selection in the display that includes paper type as speciﬁed in Key Operator mode.
Page 194 7155e091v1.fm 6 ページ２００１年１１月２８日　水曜日　午前１１時３１分 Inserting Sheets and Covers (Sheet/Cover Insertion) (continued) Position originals FACE UP in the document feeder. HINTS • For details on positioning originals, see p. 3-2. • Use RADF store mode (p. 3-33 to p. 3-34) when the original count exceeds 100.
Page 195: Locating Title Pages On The Right Side (Chapter)
Locating Title Pages on the Right Side (Chapter) Chapter is used with RADF in 1 s 2 mode for the purpose of locating title pages on the right side, rather than reverse side, of a duplex copy to improve the presentation of double-sided copies. To effectively locate the title page on the right, a blank sheet will be automatically created on the reverse side of a sheet, if required.
Page 196 7155e091v1.fm 8 ページ２００１年１１月２８日　水曜日　午前１１時３１分 Locating Title Pages on the Right Side (Chapter) (continued) Use the control panel keypad to enter the page number of each title page. Touch SET after each entry to move to the next key. When setting more than 15 locations, touch the arrow key to move to the next page.
Page 197 Locating Title Pages on the Right Side (Chapter) (continued) Enter the desired print quantity from the control panel keypad. HINT See p. 3-6 for details on setting print quantity. Position originals FACE UP in the document feeder. HINTS • For details on positioning originals, see p. 3-2 to p. 3-4. Application Selection Screen •...
Page 198: Lay Out Several Pages Onto One Sheet (Combination)
7155e091v1.fm 10 ページ２００１年１１月２８日　水曜日　午前１１時３１分 Lay Out Several Pages onto One Sheet (Combination) Use this function to lay out and copy a ﬁxed number (2, 4, or 8) of pages onto one sheet of copy paper (2 in 1, 4 in 1, or 8 in 1). >>>Speciﬁcations for Combination<<<...
Page 199: Image Insert
Lay Out Several Pages onto One Sheet (Combination) (continued) Select the desired Combination mode. Application Selection Screen Sheet/Cover Touch 2 in 1 , 4 in 1 or 8 in 1 in the desired order area, referring to the illustra- Insertion tion on the following page.
Page 200 7155e091v1.fm 12 ページ２００１年１１月２８日　水曜日　午前１１時３１分 Lay Out Several Pages onto One Sheet (Combination) (continued) Enter the desired print quantity from the control panel keypad. HINT See p. 3-6 for details on setting print quantity. Position originals FACE UP in the document feeder. HINTS •...
Page 201: Making A Multiple Page Signature Booklet (Booklet)
Making a Multiple Page Signature Booklet (Booklet) Use the Booklet to make a multiple page signature booklet on both sides of paper from any tray unless it is speciﬁed as Thick or Tab paper of the paper type in the Key Operator mode. Original images are scanned into memory and automatically arranged in booklet format in correct order.
Page 202 7155e091v1.fm 14 ページ２００１年１１月２８日　水曜日　午前１１時３１分 Making a Multiple Page Signature Booklet (Booklet) (continued) Touch Booklet on the Application Selection Screen. Touch to highlight the desired Booklet mode key. When a cover sheet is required, touch CHANGE COVERS TRAY to select the cover sheet tray source. Touch CHANGE OF THE OUTPUT MODE is you want to change the output order.
Page 203 Making a Multiple Page Signature Booklet (Booklet) (continued) Select the 1 s s s s 2 or 2 s s s s 2 copy mode. FOR DETAILS If the copier is equipped with FS-210 Finisher, Fold or Stitch & Fold out- put mode is available.
Page 204 7155e091v1.fm 16 ページ２００１年１１月２８日　水曜日　午前１１時３１分 Making a Multiple Page Signature Booklet (Booklet) (continued) FOR DETAILS: Selecting Fold / Stitch & Fold Mode 1 Touch OUTPUT MENU on the Basic Screen to display the Output Mode popup menu, then touch MAIN TRAY to highlight it. 2 Touch STITCH &...
Page 205: Copying Onto Transparent Films (Ohp Interleave)
Copying onto Transparent Films (OHP Interleave) Use the OHP Interleave function in 1s1 or 2s1 mode to copy onto overhead projection transparent ﬁlms, and output a blank or copied interleaf sheet with each copied transparent ﬁlm. In the Blank sheet interleaving mode, a blank interleaf sheet is output with each transparent ﬁlm to keep the ﬁlm material from sticking together.
Page 206 7155e091v1.fm 18 ページ２００１年１１月２８日　水曜日　午前１１時３１分 Copying onto Transparent Films (OHP Interleave) (continued) Touch OHP Interleave on the Application Selection Screen. Select the desired OHP Interleave mode, then touch OK . Touch OK on the Application Selection Screen. The Basic Screen will be restored. FOR DETAILS •...
Page 207: The Document Feeder
Inserting Images into Printed Sets (Image Insert) Use the Image insert mode to combine images scanned from the platen glass, such as photos, paste-ups, newspaper articles, graphs, etc., with images scanned from the document feeder. Then, output the combined images as a ﬁnished set. The selected copy paper size is determined by the size of originals loaded in the document feeder.
Page 208 7155e092v1.fm 20 ページ２００１年１１月２７日　火曜日　午後４時１５分 Inserting Images into Printed Sets (Image Insert) (continued) Use the control panel keypad to enter the page number. Touch SET after each entry to move to the next key. When setting more than 15 locations, touch the arrow key to move to the next page.
Page 209 Inserting Images into Printed Sets (Image Insert) (continued) Scan the platen glass images. Open the document feeder. Position an original FACE DOWN on the platen glass, then close the document feeder. Please Be Reminded! PLACE AND SCAN THE ORIGINALS ACCORDING TO PAGINATION. Press [ START ].
Page 210: Dividing An Image Into Right And Left Pages (Dual Page)
7155e092v1.fm 22 ページ２００１年１１月２７日　火曜日　午後４時１５分 Dividing an Image into Right and Left Pages (Dual Page) The Dual Page mode performs image division on the original image. Use this function to copy an open book or a A3/B4 size sheet onto two A4/B5 sheets in 1 s 1 or 2 s 1 mode, or onto the front and back sides of one A4/B5 sheet in 1 s 2 or 2 s 2 mode.
Page 211: Non-Image Area Erase
Dividing an Image into Right and Left Pages (Dual Page) (continued) Touch Dual Page on the Application Selection Screen. Application Selection Screen Sheet/Cover The Dual Page Screen will be displayed. Insertion Chapter Select the desired Dual Page mode. Combination Booklet Interleave Image Insert Dual Page...
Page 212 7155e092v1.fm 24 ページ２００１年１１月２７日　火曜日　午後４時１５分 Dividing an Image into Right and Left Pages (Dual Page) (continued) Select the desired copy mode, magniﬁcation, and paper size. FOR DETAILS • Available paper size is A4 or B5. • When selecting Facing pages mode and scanning from the platen glass, select 1 s 1 or 1 s 2 copy mode.
Page 213 Dividing an Image into Right and Left Pages (Dual Page) (continued) Scanning Original for Cover Use platen glass for scanning original for cover. 1 Open the document feeder. 2 Position original for front cover FACE DOWN on the platen glass. 3 Press [START] to start scanning.
Page 214: Programming Different Settings For An Output Job (Program Job)
7155e092v1.fm 26 ページ２００１年１１月２７日　火曜日　午後４時１５分 Programming Different Settings for an Output Job (Program Job) In the ordinary Store mode, the combined features selected for the job are applied to all originals to be scanned. In the Program Job mode, you may scan multiple sets of originals and apply different settings on each set (referred to as JOB), then output them all as a complete set.
Page 215: Reverse Image
Programming Different Settings for an Output Job (Program Job) (continued) Touch Program Job on the Application Selection Screen. Application Selection Screen Sheet/Cover The incompatible function keys will be dimmed to show inactivity. Insertion Chapter Touch OK on the Application Selection Screen. The Basic Screen will be restored.
Page 216 7155e092v1.fm 28 ページ２００１年１１月２７日　火曜日　午後４時１５分 Programming Different Settings for an Output Job (Program Job) (continued) Repeat steps 4 to 7 until all JOB originals are scanned. Please Be Reminded! PLACE AND SCAN EACH ORIGINAL SET IN THE CORRECT ORDER OF PAGINATION. HINTS •...
Page 217: Erasing Outside Of The Original (Non-Image Area Erase)
Erasing Outside of the Original (Non-Image Area Erase) The Non-image area erase mode is used to copy non standard or special originals, such as books, magazines, paste-ups, graphs, thick or thin materials, etc. from the platen glass. The exposed glass area outside the borders of the original will not be copied.
Page 218 7155e092v1.fm 30 ページ２００１年１１月２７日　火曜日　午後４時１５分 Erasing Outside of the Original (Non-Image Area Erase) (continued) Touch OK on the Application Selection Screen. The Basic Screen will be restored. Select magniﬁcation and paper size, as desired. FOR DETAILS • APS and AMS are automatically released. •...
Page 219: Reversing Colour In Black And White Image (Reverse Image)
Reversing Colour in Black and White Image (Reverse Image) Use Reverse image to reverse the image from black-on-white to white-on- black, and vice versa. This is very good for copying white-on-black originals and reversing them ready to fax. >>>Speciﬁcations for Reverse Image<<< ❒...
Page 220 7155e092v1.fm 32 ページ２００１年１１月２７日　火曜日　午後４時１５分 Reversing Colour in Black and White Image (Reverse Image) (continued) Enter the desired print quantity from the control panel keypad. HINT See p. 3-6 for details on setting print quantity. Position original(s) FACE UP in the document feeder or FACE DOWN on the platen glass.
Page 221: Repeating Selected Image Area (Repeat: Vert./Horiz. Mode)
Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) Use this function to repeat the selected image area of 10mm ~ 150mm in both vertical and horizontal widths measured from the rear left corner of the A3 original area indicated on the left edge of the platen glass. >>>Vertical/Horizontal Width Setting Mode Speciﬁcations<<<...
Page 222 7155e092v1.fm 34 ページ２００１年１１月２７日　火曜日　午後４時１５分 Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) (continued) Touch Vertical/Horizontal , then specify the vertical and horizontal widths of the scanning area. Use up/down arrow key to enter the width from 10 to 150mm in 1mm incre- ments.
Page 223 Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) (continued) Enter the desired print quantity from the control panel keypad. HINT See p. 3-6 for details on setting print quantity. Position original FACE DOWN on the platen glass. HINT See the illustration on p. 9-33 for details. Application Selection Screen Press [START].
Page 224: Repeating Automatically Or Selecting Repeating Times
7155e092v1.fm 36 ページ２００１年１１月２７日　火曜日　午後４時１５分 Repeating Automatically or Selecting Repeating Times (Repeat: AUTO/ Repeat Mode) Auto Detection mode will automatically set the equal repeat area to the size of the original placed onto the platen glass by activating Non-image area erase. Repeat mode will scan the image area speciﬁed by the selected paper size and mode (2 Repeat, 4 Repeat, or 8 Repeat), then arrange the image by speciﬁed times in one copy sheet.
Page 225 Repeating Automatically or Selecting Repeating Times (Repeat: AUTO/ Repeat Mode) (continued) Touch APPLICATION on the Basic Screen. Please Be Reminded! When starting a new copying job, be sure to close the RADF securely, then press [ AUTO RESET ]. Touch Repeat on the Application Selection Screen. Application Selection Screen Sheet/Cover...
Page 226 7155e092v1.fm 38 ページ２００１年１１月２７日　火曜日　午後４時１５分 Repeating Automatically or Selecting Repeating Times (Repeat: AUTO/ Repeat Mode) (continued) Touch OK on the Application Selection Screen. The Basic Screen will be restored. Select the desired magniﬁcation and paper size. FOR DETAILS • APS and AMS are automatically released, and 1.00 (100%) is selected as a magniﬁcation ratio.
Page 227: Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure)
Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure) Use Frame/Fold Erasure to eliminate black copy marks along borders to clean up and improve the presentation of the copy. >>>Speciﬁcations for Frame/Fold Erasure<<< ❒ Incompatible Conditions: Repeat, Full-Image Area Application Selection Screen Sheet/Cover Frame Frame...
Page 228 7155e092v1.fm 40 ページ２００１年１１月２７日　火曜日　午後４時１５分 Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure) (continued) Touch to highlight the desired mode key. Touch Frame Erasure (All sides) , Frame Erasure (Each side) , or Fold Era- sure to highlight it. Either Frame erasure mode and Fold erasure can be selected in combination. Specify the erasure amount in the selected mode.
Page 229 Eliminating Black Copy Marks Along Borders (Frame/Fold Erasure) (continued) To specify Fold Erasure amount: Application Selection Screen • Touch to highlight FOLD , if not highlighted, then use the touch screen key- Sheet/Cover pad or up/down arrow key to enter the desired erasure amount, from 1 to Insertion 99mm in 1mm increments.
Page 230: Copying Image In The Centre Of Copy Paper (Auto Layout)
7155e092v1.fm 42 ページ２００１年１１月２７日　火曜日　午後４時１５分 Copying Image in the Centre of Copy Paper (AUTO Layout) Use this function to detect the image area of the original and centre the whole image on the copy paper making it easy to copy small pieces of paper. >>>Speciﬁcations for AUTO Layout<<<...
Page 231 Copying Image in the Centre of Copy Paper (AUTO Layout) (continued) Touch OK on the Application Selection Screen. The Basic Screen will be restored. Select the desired magniﬁcation and paper size on the Basic Screen. FOR DETAILS • APS and AMS are automatically released, and 1.00 (100%) is Application selected as a magniﬁcation ratio.
Page 232: Printing Images Fully To The Edges (Full-Image Area)
7155e093v1.fm 44 ページ２００１年１１月２７日　火曜日　午後４時２３分 Printing Images Fully to the Edges (Full-Image Area) Use this function to make copies printed completely to the edges. >>>Speciﬁcations for Full-Image Area<<< ❒ Incompatible Conditions: Rotation Sort, Rotation Group, Non-Image Area Erase, Reverse Image, Frame/Fold Erasure Original Normal copy Full-Image Area copy...
Page 233 Printing Images Fully to the Edges (Full-Image Area) (continued) Position original(s) FACE UP in the document feeder or FACE DOWN on the platen glass. HINTS For details on positioning originals, see p. 3-2 to p. 3-5. Press [START]. CAUTION Application Selection Screen When the ﬁnisher / paper exit tray capacity is exceeded due to Sheet/Cover...
Page 234: Adjusting Position Of Copy Image (Image Shift)
7155e093v1.fm 46 ページ２００１年１１月２７日　火曜日　午後４時２３分 Adjusting Position of Copy Image (Image Shift) Use Image Shift to adjust the position of copy images, e.g. for the purpose of creating a new binding margin on originals to make it easier for ﬁling purposes. Page Space function is available only when Booklet or 2 Repeat mode of Repeat has been already selected.
Page 235: Full-Image Area
Adjusting Position of Copy Image (Image Shift) (continued) Touch Image Shift on the Application Selection Screen. Application Selection Screen Sheet/Cover Insertion Touch Image Shift on the Image Shift Setting Screen, then specify Chapter the shift direction and amount. Combination Booklet Interleave Image Insert Dual Page...
Page 236 7155e093v1.fm 48 ページ２００１年１１月２７日　火曜日　午後４時２３分 Adjusting Position of Copy Image (Image Shift) (continued) Touch OK . The Application Selection Screen will be restored. Touch OK on the Application Selection Screen. The Basic Screen will be restored. Enter the desired print quantity from the control panel keypad. HINT See p.
Page 237: Reducing Images To Create Binding Margin (Reduce&Shift)
Reducing Images to Create Binding Margin (Reduce&Shift) Use Reduce & Shift instead of regular Image Shift to prevent image loss when creating a binding margin. >>>Speciﬁcations for Reduce & Shift<<< ❒ AMS is automatically selected and cannot be released. ❒ Shift amount: 0 to 250mm in 1mm increments Setting in 0.1mm increments using up/down arrow key is also available by Key Operator setting.
Page 238 7155e093v1.fm 50 ページ２００１年１１月２７日　火曜日　午後４時２３分 Reducing Images to Create Binding Margin (Reduce&Shift) (continued) Select the copy mode and paper size, as required. Touch APPLICATION on the Basic Screen. Please Be Reminded! When starting a new copying job, be sure to close the RADF securely, then press [ AUTO RESET ].
Page 239 Reducing Images to Create Binding Margin (Reduce&Shift) (continued) Touch OK. The Application Selection Screen will be restored. Touch OK on the Application Selection Screen. The Basic Screen will be restored. Enter the desired print quantity from the control panel keypad. Application HINT Selection Screen...
Page 240: Printing Stamp, Page, Date/Time Onto Copies (Stamp)
7155e093v1.fm 52 ページ２００１年１１月２７日　火曜日　午後４時２３分 Printing Stamp, Page, Date/Time onto Copies (Stamp) This function allows you to print onto output copies the desired type of stamp, page number, numbering, and date/time at the location designated on the screen. The four stamp types and watermark (described in the next subsection) provided on the Stamp/Overlay Selection Screen can be used individually or in multiple combinations.
Page 241 Printing Stamp, Page, Date/Time onto Copies (Stamp) (continued) Touch Stamp/Overlay on the Application Selection Screen. Application Selection Screen Sheet/Cover The Stamp/Overlay Selection Screen will be displayed. Insertion Chapter Touch to select the desired key in the STAMP area. Combination Booklet Interleave Image Insert Dual Page...
Page 242 7155e093v1.fm 54 ページ２００１年１１月２７日　火曜日　午後４時２３分 Printing Stamp, Page, Date/Time onto Copies (Stamp) (continued) When selecting SET NUMBERING : Specify the numbering type, printing position, character size, printed page and starting No. Touch to highlight the desired numbering type key and printing position key on the screen.
Page 243 Printing Stamp, Page, Date/Time onto Copies (Stamp) (continued) When selecting DATE/TIME : Specify the date/time type, printing position, character size and printed page. Application Selection Screen Sheet/Cover Insertion Touch to highlight the desired date, time, and printing position keys on the screen.
Page 244 7155e093v1.fm 56 ページ２００１年１１月２７日　火曜日　午後４時２３分 Printing Stamp, Page, Date/Time onto Copies (Stamp) (continued) CAUTION When the ﬁnisher / paper exit tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur. FOR DETAILS: Fine Adjustment Setting Screen When FINE ADJ.
Page 245 Printing Stamp, Page, Date/Time onto Copies (Stamp) (continued) Use + ↔ – to enter a minus Originals number to print from half- way through, e.g. –2 to print “1” from page 4. Touch OK to return to the When “(+)2” is entered: previous screen.
Page 246: Printing Watermark Onto Copies (Stamp)
7155e093v1.fm 58 ページ２００１年１１月２７日　火曜日　午後４時２３分 Printing Watermark onto Copies (Stamp) Use this function to print the desired letter type obliquely in the centre of the page (WATERMARK), or the numbers in the speciﬁed form repeatedly over the scanned image (WATERMARK NUMBERING). >>>Speciﬁcation for WATERMARK and WATERMARK NUMBERING<<<...
Page 247: Shift
Printing Watermark onto Copies (Stamp) (continued) Touch WATERMARK or WATERMARK NUMBERING , as desired. Application Selection Screen Sheet/Cover The subsequent screen will be displayed to allow you to specify the selected Insertion watermark type. Chapter When selecting WATERMARK : Specify the desired watermark Combination type and density.
Page 248 7155e093v1.fm 60 ページ２００１年１１月２７日　火曜日　午後４時２３分 Printing Watermark onto Copies (Stamp) (continued) Touch OK . The Stamp/Overlay Selection Screen will be restored. Touch to select another stamp function key to use in combination, if desired. Touch OK on the Stamp/Overlay Selection Screen. The Application Selection Screen will be restored.
Page 249: Overlaying An Image Onto Each Page Copied In The Job (Overlay)
Overlaying an Image onto Each Page Copied in the Job (Overlay) Use this function to scan an image, then overlay the image onto each page copied in the job. >>>Speciﬁcation for Overlay<<< ❒ Store mode is automatically selected. ❒ Incompatible Conditions: Rotation, Rotation Sort, Rotation Group, Mixed Original, Sheet/Cover Insertion, Combination, OHP Interleave, Image Insert, Dual page, Program Job, Repeat, AUTO Layout, Reduce &...
Page 250 7155e093v1.fm 62 ページ２００１年１１月２７日　火曜日　午後４時２３分 Overlaying an Image onto Each Page Copied in the Job (Overlay) (continued) Touch OVERLAY . Touch OK on the Stamp/Overlay Selection Screen. The Application Selection Screen will be restored. Touch OK on the Application Selection Screen. The Basic Screen will be restored.
Page 251 Overlaying an Image onto Each Page Copied in the Job (Overlay) (continued) Press [START] to scan. Repeat steps 10 and 11 for all originals. Touch STORE to exit the Store mode, then press [START] to print. CAUTION When the ﬁnisher / paper exit tray capacity is exceeded due to Application the print quantity selected, remove the copied sets as they exit;...
Page 252: Storing An Overlay Image In Hdd / Overlaying Image
7155e093v1.fm 64 ページ２００１年１１月２７日　火曜日　午後４時２３分 Storing an Overlay Image in HDD / Overlaying Image Stored in HDD (Overlay Memory) Use Overlay Memory to scan and store several images in HDD, then recall the desired image from the HDD to overlay onto each page copied in the job. >>>Speciﬁcation for Overlay Memory<<<...
Page 253: Storing An Overlay Image In Hdd
Storing an Overlay Image in HDD / Overlaying Image Stored in HDD (Overlay Memory) (continued) Touch Stamp/Overlay on the Application Selection Screen. Application Selection Screen Sheet/Cover The Stamp/Overlay Selection Screen will be displayed. Insertion Chapter Touch OVERLAY MEMORY . Combination Booklet Interleave Image Insert...
Page 254 7155e093v1.fm 66 ページ２００１年１１月２７日　火曜日　午後４時２３分 Storing an Overlay Image in HDD / Overlaying Image Stored in HDD (Overlay Memory) (continued) Enter the desired image name. Use the touch screen keypad to enter the desired name up to 8 characters. The date when you made this entry will also be stored automatically. To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each character, then enter the correct name.
Page 255 Storing an Overlay Image in HDD / Overlaying Image Stored in HDD (Overlay Memory) (continued) The machine automatically starts to store the overlaying image data in the HDD. The Overlaying Image Selection Screen will resume when the storing function is completed. To continue to store the overlaying image data, return to step 4 .
Page 256 7155e093v1.fm 68 ページ２００１年１１月２７日　火曜日　午後４時２３分 Storing an Overlay Image in HDD / Overlaying Image Stored in HDD (Overlay Memory) (continued) CAUTION When the ﬁnisher / paper exit tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur.
Page 257: Server Function
Server Function How to Use Server Functions o Use Server Functions ............... 10-2 toring/Deleting Image Data in HDD/PC (Image Store/Delete)... 10-4 toring Image Data While Copying (Image Store&Output)..10-14 ecalling Image Data from HDD/PC (Image Recall) ....10-17 diting Image Data Using PC (Image Edit) ......... 10-20 Server Functions Image...
Page 258: To Use Server Functions
7155e10v1.fm 2 ページ２００１年１１月２８日　水曜日　午前１１時４４分 To Use Server Functions Use Server function with HDD to accumulate scanned images into built-in DIMM (memory), then store the image data in HDD (option) so that the data can be recalled to DIMM and output as needed. This function also allows you to store the image data for normal copying procedures.
Page 259 To Use Server Functions (continued) w w w w Image Store & Output mode Store the scanned image data in HDD after copying is completed. e e e e Image Recall mode Recall the image data stored in HDD/PC to built-in DIMM for printing. Server Functions Image...
Page 260: Storing/Deleting Image Data In Hdd/Pc (Image Store/Delete)
7155e10v1.fm 4 ページ２００１年１１月２８日　水曜日　午前１１時４４分 Storing/Deleting Image Data in HDD/PC (Image Store/Delete) Use this function to store the image data into HDD/PC. In the event data is already stored in HDD/PC, use this function to transmit it from HDD to PC or delete it from HDD/PC.
Page 261 Storing/Deleting Image Data in HDD/PC (Image Store/Delete) (continued) Touch IMAGE STORE/DELETE . The Image Data Store/Delete Site Selection Screen will be displayed. Touch SCANNER → HDD or SCANNER → PC . Server The Image Data Password Entry Screen will be displayed. Functions Image HINTS...
Page 262 7155e10v1.fm 6 ページ２００１年１１月２８日　水曜日　午前１１時４４分 Storing/Deleting Image Data in HDD/PC (Image Store/Delete) (continued) If the password is correct, touch OK . The Job Name Entry Screen will be displayed. Enter the desired job name in up to 8 characters from the touch screen keypad.
Page 263 Storing/Deleting Image Data in HDD/PC (Image Store/Delete) (continued) Position original(s) FACE UP in the document feeder or FACE DOWN on the platen glass. HINT See p. 3-2 to p. 3-5 for details on positioning originals. Press [ START ] to scan original(s). When scanning originals is completed, the machine automatically begins storing data in the HDD.
Page 264: To Transmit Image Data From Hdd To Pc
7155e10v1.fm 8 ページ２００１年１１月２８日　水曜日　午前１１時４４分 Storing/Deleting Image Data in HDD/PC (Image Store/Delete) (continued) To Transmit Image Data from HDD to PC The password speciﬁed when storing the data in HDD is required. The image data is to be speciﬁed by the given job name. Store Press [ MODE ] to light up the [ SCAN/SERVER ] LED.
Page 265 Storing/Deleting Image Data in HDD/PC (Image Store/Delete) (continued) Touch HDD → PC . The Image Data Password Entry Screen will be displayed. Enter your image data password from the touch screen keypad. Server To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete Functions each character, then enter the correct job name.
Page 266 7155e10v1.fm 10 ページ２００１年１１月２８日　水曜日　午前１１時４４分 Storing/Deleting Image Data in HDD/PC (Image Store/Delete) (continued) Perform the data transmission procedure on PC. The data transmission will start. HINT For detailed information on the data transmission procedure on PC side, contact your service representative. When the data transmission is completed, the popup menu will appear to ask whether you delete the data from HDD.
Page 267: To Delete Image Data From Hdd/Pc
Storing/Deleting Image Data in HDD/PC (Image Store/Delete) (continued) To Delete Image Data from HDD/PC The password speciﬁed when storing the data in HDD/PC is required. The image data is to be speciﬁed by the given job name. Delete Delete Press [ MODE ] to light up the [ SCAN/SERVER ] LED. COPY SCAN / SERVER PRINT...
Page 268 7155e10v1.fm 12 ページ２００１年１１月２８日　水曜日　午前１１時４４分 Storing/Deleting Image Data in HDD/PC (Image Store/Delete) (continued) Touch SCANNER → HDD or SCANNER → PC . The Image Data Password Entry Screen will be displayed. HINT To delete the data stored in PC, operation on PC side is also required. For detailed information on deleting an image data from PC, contact your service representative.
Page 269 Storing/Deleting Image Data in HDD/PC (Image Store/Delete) (continued) The popup menu will appear to conﬁrm that you delete the selected data. Touch YES to delete the selected data, or touch NO to cancel. The popup menu will disappear. Touch OK to restore the Scan/Server Setting Menu Screen. FOR DETAILS To delete the data stored with different password, touch PREVIOUS SCREEN to return to the Image Data Password Entry Screen.
Page 270: Storing Image Data While Copying (Image Store&Output)
7155e10v1.fm 14 ページ２００１年１１月２８日　水曜日　午前１１時４４分 Storing Image Data While Copying (Image Store&Output) Use this function to store the scanned image data in HDD after copying is completed. FOR DETAILS Installation of the optional HDD (HD-105) is required for this function. With the HDD installed, the HDD STORE key will be displayed on the Output Mode popup menu.
Page 271 Storing Image Data While Copying (Image Store&Output) (continued) Enter the desired image data password in up to 8 characters from the touch screen keypad. To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each character, then enter the correct password. If the password is correct, touch OK .
Page 272 7155e10v1.fm 16 ページ２００１年１１月２８日　水曜日　午前１１時４４分 Storing Image Data While Copying (Image Store&Output) (continued) Press [ START ] to scan and then print. When the Store mode is used, touch STORE on the Basic Screen to deselect the Store mode when the store function is completed, i.e., after all originals are scanned, then press [ START ] to print.
Page 273: Recalling Image Data From Hdd/Pc (Image Recall)
Recalling Image Data from HDD/PC (Image Recall) Use this function to recall the image data from the HDD/PC to the built-in DIMM for printing. FOR DETAILS • Installation of the optional HDD (HD-105) is required to recall data from HDD. •...
Page 274 7155e10v1.fm 18 ページ２００１年１１月２８日　水曜日　午前１１時４４分 Recalling Image Data from HDD/PC (Image Recall) (continued) Enter your image data password from the touch screen keypad. To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each character, then enter the correct job name. Touch OK .
Page 275 Recalling Image Data from HDD/PC (Image Recall) (continued) Selecting WAIT OUTPUT : (1)Touch OK . When the data transmission is completed, the Basic Screen will be displayed reﬂecting the settings made for that job. (2)Enter the desired print quantity, then press [ START ] to print. Selecting PROOF OUTPUT : (1)Touch OK .
Page 276: Editing Image Data Using Pc (Image Edit)
7155e10v1.fm 20 ページ２００１年１１月２８日　水曜日　午前１１時４４分 Editing Image Data Using PC (Image Edit) Use this function to transmit a scanned image data to PC to edit it, and return the edited data to DIMM for printing. The edited image data cannot be stored and will be deleted when printing job is completed.
Page 277 Editing Image Data Using PC (Image Edit) (continued) Touch IMAGE EDIT . The Scanner Setting Screen will be displayed. Select the desired scanning conditions. Server Print quantity cannot be entered. Functions Image Store/Delete Position original(s) FACE UP in the document feeder or FACE Image DOWN on the platen glass.
Page 278 7155e10v1.fm 22 ページ２００１年１１月２８日　水曜日　午前１１時４４分 Editing Image Data Using PC (Image Edit) (continued) Press [ START ] to scan. After scanning is completed, the Image Data Edit Screen will be displayed to indicate that the scanned image data is ready for transmission. FOR DETAILS To stop the Image Edit operation while the Image Data Edit Screen is displayed, touch EXIT .
Page 279: Original Info
Paper and Original Information aper Information ................11-2 riginal Information ..............11-7 Paper Information Original Information P aper & Original Info...
Page 280: Paper Information
7155e11v1.fm 2 ページ２００１年１１月２７日　火曜日　午後４時４２分 Paper Information This machine is equipped with the following trays for loading copy paper. • Tray 1, 2 and 3 (Main body tray) • LCT (LT-402/LT-412 Large Capacity Tray) • Multi-sheet bypass tray Also, following equipments are provided for conveying/delivering copies. •...
Page 281: Tray/ Exit Tray Capacity
Paper Information (continued) Tray/ Exit Tray Capacity Paper Trays Capacity Tray 1, 2, and 3 (Main body tray) Tray 1 or 2: 500 sheets (80g/m Tray 3: 1,500 sheets (80g/m LCT (LT-402/LT-412) 4,000 sheets (80g/m Multi-sheet bypass tray 100 sheets (80g/m 1 sheet each for thick/thin paper and transparent ﬁlm Equipments...
Page 282: Paper Size
7155e11v1.fm 4 ページ２００１年１１月２７日　火曜日　午後４時４２分 Paper Information (continued) Paper Size Paper Trays Available Sizes Tray 1, 2, and 3 (Main body tray) STD size: A3, B4, F4, A4, A4R, B5, B5R, A5*, 11"x17", 8.5"x14", 8.5"x11" *Portrait orientation only. STD (special): Detects 8.5"x11"R instead of A4R, 5.5"x8.5"...
Page 283 Paper Information (continued) Paper Trays Available Sizes Multi-sheet bypass tray STD size: A3, B4, F4, A4, A4R, B5, B5R, A5, A5R, A6R, 11"x17", 8.5"x11" STD (special): Detects 8.5"x11"R or F4 instead of A4R, B6R or 5.5"x8.5" instead of A5R. Non STD size: Max.
Page 284: Special Paper In Multi-Sheet Bypass Tray
7155e11v1.fm 6 ページ２００１年１１月２７日　火曜日　午後４時４２分 Paper Information (continued) Special Paper in Multi-Sheet Bypass Tray Multi-sheet bypass tray accepts the following special paper type that cannot be loaded in the main body trays. Transparent ﬁlm, labels, hole punch, rag content FOR DETAILS When using special paper type other than the above mentioned, select “User”...
Page 285: Original Information
Original Information Use the platen glass or document feeder to position originals to copy. Platen Glass Originals Use the platen glass when originals are not suitable for use with the document feeder, e.g., when size is incompatible, or when originals are folded, stapled, torn, or in generally poor condition.
Page 286: Radf Originals
7155e11v1.fm 8 ページ２００１年１１月２７日　火曜日　午後４時４２分 Original Information (continued) RADF Originals Following three modes are provided when using the document feeder (RADF) to scan originals. • Normal mode • Mixed Original mode • Z-Folded Original mode Speciﬁcations for each mode are described as follows. HINT Detectable paper size can be changed from only A series to Inch series, AB series, or AB series and Inch series mixed by Key Operator.
Page 287 Original Information (continued) FOR DETAILS See below for the guide width of each combination. Guide Guide Guide width width width Z-Folded Original mode Use Z-Folded Original mode to scan folded originals without using the size detection sensor of the RADF. See p. 8-8 for details. ❒...
Page 288 7155e11v1.fm 10 ページ２００１年１１月２７日　火曜日　午後４時４２分...
Page 289 Maintenance & Supplies How to Maintain the Copier dding Toner.................. 12-2 nserting a New Staple Cartridge into FS-110/210 Finisher ..12-5 mpty Waste Basket of PK-110 Punching Kit........ 12-8 leaning Image Scanning Section........... 12-10 hecking Copy Count ..............12-12 achine Condition Information ..........12-14 opy Materials................
Page 290: Adding Toner
7155e12v1.fm 2 ページ２００１年１１月２７日　火曜日　午後４時４６分 Adding Toner When toner supply is low, the message “Please add toner” and the ADD TONER icon ( ) display on the touch screen. Please Be Reminded! Use the toner cartridge of the same number as the number described on the label of a toner access door inner side, otherwise the machine trouble may occur.
Page 291 Adding Toner (continued) Remove the empty toner cartridge. Shake the new Toner cartridge several times to loosen toner. Remove the Toner cartridge cap. Adding Toner Inserting New Staple Cartridge Empty Waste Basket Cleaning Set the new Toner cartridge into the Toner cartridge holder. Scanning Section Checking...
Page 292 7155e12v1.fm 4 ページ２００１年１１月２７日　火曜日　午後４時４６分 Adding Toner (continued) Return the toner cartridge holder to its original position, then close the Toner access door securely. CAUTION Keep the toner cartridge away from children. The toner is non- toxic; however if you inhale or contact with eyes by accident, ﬂush with water and seek medical advice.
Page 293: Inserting A New Staple Cartridge Into Fs-110/210 Finisher
Follow the procedure below to replace the staple cartridge. Please Be Reminded! Use only the staples supplied by Konica. Please contact your service representative to purchase. Open the Finisher door. Adding Toner Inserting New Pull out the stacker unit by holding the stacker unit handle.
Page 294 7155e12v1.fm 6 ページ２００１年１１月２７日　火曜日　午後４時４６分 Inserting a New Staple Cartridge into FS-110/210 Finisher (continued) Pull up the cartridge housing, then remove it while sliding it along the stapler rail. Remove the empty cartridge from the cartridge housing. Insert the new cartridge into the housing. Firmly insert the cartridge into the housing while aligning the arrow sides of both case and housing.
Page 295 Inserting a New Staple Cartridge into FS-110/210 Finisher (continued) Insert the cartridge housing while sliding it along the stapler rail, then push down and in to secure it in place. Return the stacker unit to its original position. Close the Finisher door. Adding Toner Inserting New Staple Cartridge...
Page 296: Empty Waste Basket Of Pk-110 Punching Kit
7155e12v1.fm 8 ページ２００１年１１月２７日　火曜日　午後４時４６分 Empty Waste Basket of PK-110 Punching Kit When the waste basket becomes full, “Waste basket of Punching kit is full / Please empty waste basket” message will be displayed on the touch screen, and the ﬁnished set will be output without being punched even if Punch mode is selected.
Page 297 Empty Waste Basket of PK-110 Punching Kit (continued) Empty the waste basket. Return the waste basket to its original position, then close the Finisher door securely. Adding Toner Inserting New Staple Cartridge Empty Waste Basket Cleaning Scanning Section Checking Copy Count Machine Condition Info.
Page 298: Cleaning Image Scanning Section
7155e12v1.fm 10 ページ２００１年１１月２７日　火曜日　午後４時４６分 Cleaning Image Scanning Section In order to maintain optimum copy quality, always keep the following areas clean. Cleaning the Document Glass Raise the document cover, and clean the glass with a clean soft cloth. The glass may also be cleaned with a soft cloth dampened slightly with water, if it is difﬁcult to be cleaned.
Page 299: Cleaning The Radf Platen Guide Cover
Cleaning Image Scanning Section (continued) Cleaning the RADF Platen Guide Cover The RADF platen guide cover should be kept clean; otherwise soil marks may be copied or the original size cannot be detected correctly. Raise the document cover, and clean the RADF platen guide cover with a clean soft cloth.
Page 300: Checking Copy Count
7155e12v1.fm 12 ページ２００１年１１月２７日　火曜日　午後４時４６分 Checking Copy Count This function allows you to view the current indication of the following items as a list on the touch panel: Total counter, Copier counter, Printer counter, Counter start date. Check the list, then print it from the Counter List Screen, if desired. To Display the Counter List Screen Press [ P (COUNTER) ] on the control panel.
Page 301: To Print The Counter List
Checking Copy Count (continued) To Print the Counter List Press [ P (COUNTER) ] on the control panel. COPY SCAN / SERVER PRINT CHECK HELP JOB MEMORY AUTO RESET COUNTER CLEAR QTY. The Counter List Screen will be displayed. Touch COUNTER MENU . The Basic Screen will be displayed.
Page 302: Machine Condition Information
7155e12v1.fm 14 ページ２００１年１１月２７日　火曜日　午後４時４６分 Machine Condition Information When the machine requires troubleshooting or maintenance such as paper/ toner supply, the current machine status can be reported to a network PC by an E-mail. Information Items: • Service call • JAM •...
Page 303: Copy Materials
Copy Materials Maintenance Kit Developer Charging corona plate Charging wire Charging cleaning board Charger slide member Charger cleaning block/Upper Resin ring (D = 2mm) (Charging, transfer/separation corona unit) Charger cleaning block/Lower Toner guide roller Cleaning blade Discharge wire Transfer cleaning assembly Separation cleaning assembly Transfer presser rubber Ozon ﬁlter K...
Page 304 7155e12v1.fm 16 ページ２００１年１１月２７日　火曜日　午後４時４６分...
Page 305: Key Operator
Key Operator Key Operator Mode Mode System Initial Setting How to Monitor Copier Activity and Copier Initial Modify Machine Settings Setting User Setting Mode ow to Access the Key Operator Mode ......... 13-2 E.K.C. [1] S ystem Initial Setting ............13-4 Lock/Delete [2] C Job Memory...
Page 306: How To Access The Key Operator Mode
7155e131v1.fm 2 ページ２００１年１１月２７日　火曜日　午後４時５４分 How to Access the Key Operator Mode The Key Operator is trained to handle all special Key Operator functions that are not accessible to the general user, such as monitoring overall copier activity, machine performance, and service information; modifying machine settings;...
Page 307: S Ystem Initial Setting
How to Access the Key Operator Mode (continued) FOR DETAILS If an invalid Key Operator password is entered, continue by entering the valid 4-digit password. If the Key Operator password is not valid, check with your service repre- sentative. Make setting changes from the Key Operator Mode Screen, as described on the following pages.
Page 308: System Initial Setting
7155e131v1.fm 4 ページ２００１年１１月２７日　火曜日　午後４時５４分 [1] System Initial Setting Set the following initial conditions of the copier. • Date & Time setting: Current date and time, summer time • Language select setting: Language used in LCD (English) • IP address setting: IP address to be accessed from PC •...
Page 309 [1] System Initial Setting (continued) To set this function, follow the procedure below. (1) Touch Diff. time setting to display the Difference in Time Setting Screen. (2) Touch + ↔ – to display “+” when the local time is earlier than the Universal time, or “–”...
Page 310: Language Select Setting
7155e131v1.fm 6 ページ２００１年１１月２７日　火曜日　午後４時５４分 [1] System Initial Setting (continued) [2] Language Select Setting Select the language used in the LCD. ❒ Default setting: English System Initial Setting Menu Screen Language Selection Screen Procedure 1 Touch [1] System initial setting on the Key Operator Mode Screen to display the System Initial Setting Menu Screen.
Page 311: Ip Address Setting
[1] System Initial Setting (continued) [3] IP Address Setting When using the server function, this setting is required to enable a PC to gain access to this machine. NOTE: Ask your network manager to perform this setting. Incorrect setting may cause a trouble in other network systems.
Page 312: E-Mail Transmission Setting
7155e131v1.fm 8 ページ２００１年１１月２７日　火曜日　午後４時５４分 [1] System Initial Setting (continued) [4] E-Mail Transmission Setting When the machine requires troubleshooting or maintenance such as paper or toner supply, this setting allows several network PCs to be informed of the current machine status by E-mail. The following information items are provided.
Page 313 [1] System Initial Setting (continued) E-Mail Set (Condition Inform) Screen 4 Touch [3] E-Mail set (condition inform) to display the E-Mail Set (Condition Inform) Screen. Enter the E-mail address of the network PC using screen keypad, then touch OK to restore the E-Mail Transmission Setting Screen.
Page 314: Copier Initial Setting
7155e131v1.fm 10 ページ２００１年１１月２７日　火曜日　午後４時５４分 [2] Copier Initial Setting Initial settings are the settings that display automatically when the copier is powered on, when Auto/Reset timer is operated, or when [ AUTO RESET ] key is pressed. These settings can be changed by the Key Operator, as shown in this section.
Page 315: Paper Type
[2] Copier Initial Setting (continued) Key Operator Mode Screen Copier Initial Setting Screen Procedure Key Operator 1 Touch [2] Copier Initial setting on the Key Operator Mode Screen to display Mode the Copier Initial Setting Screen. System Initial Setting 2 Make a selection for each mode as initial settings. Copier Initial Touch RADF to select or deselect it.
Page 316: User Setting Mode
7155e131v1.fm 12 ページ２００１年１１月２７日　火曜日　午後４時５４分 [3] User Setting Mode Set two userset density levels and three USERSETs of magniﬁcation. [1] User Density Level 1 Setting Output copying samples from 16 density levels from Lighter to Normal or Normal to Darker, then select the desired exposure and program it as USER1.
Page 317: User Density Level 2 Setting
[3] User Setting Mode (continued) [2] User Density Level 2 Setting Output copying samples from 16 density levels from Lighter to Normal or Normal to Darker, then select the desired exposure and program it as USER2. The programmed copy density can be recalled by selecting USER2 on the Basic Screen.
Page 318: User Lens Mode Ratio Setting
7155e131v1.fm 14 ページ２００１年１１月２７日　火曜日　午後４時５４分 [3] User Setting Mode (continued) [3] User Lens Mode Ratio Setting The preset and userset ratios are used to reduce and enlarge the original image to accommodate copy paper size, and are available on the Basic Screen.
Page 319: Electronic Key Counter) Function Setting
[4] E.K.C. (Electronic Key Counter) Function Setting This function can only be accessed by the Key Operator after a 8-digit EKC master key code is entered. The Electronic Key Counter allows you to monitor all copying activity by controlling EKC password accounts. This feature can track copier usage for individual users and/or accounts as well as limit access to the copier to authorized users.
Page 320: How To Access The Ekc Setting Mode
7155e131v1.fm 16 ページ２００１年１１月２７日　火曜日　午後４時５４分 [4] E.K.C. (Electronic Key Counter) Function Setting (continued) How to Access the EKC Setting Mode Key Operator Mode Screen EKC Master Key Code Screen EKC Setting Menu Screen Procedure 1 Touch [4] E.K.C. function setting on the Key Operator Mode Screen. The EKC Master Key Code Screen displays, if a code is required.
Page 321: Data Edit
[4] E.K.C. (Electronic Key Counter) Function Setting (continued) [1] E.K.C. Data Edit Use this setting to display the list of copy count and copy limit for each account, to change, add, or delete the EKC data, and to reset the copy count of the individual account.
Page 322 7155e131v1.fm 18 ページ２００１年１１月２７日　火曜日　午後４時５４分 [4] E.K.C. (Electronic Key Counter) Function Setting (continued) 3 To change, add, or delete the EKC data, and to reset the copy count of the individual account, follow the procedure for each as described below. To Change EKC Data: (1) Touch ▲...
Page 323 [4] E.K.C. (Electronic Key Counter) Function Setting (continued) When a password is duplicated: The Password Duplication Screen will be displayed. Touch YES to re-enter new password, or NO to create duplicate password. NOTE: If duplicate password is created, the number of copies will be counted only for the EKC password with the smallest No.
Page 324: All Count Reset
7155e131v1.fm 20 ページ２００１年１１月２７日　火曜日　午後４時５４分 [4] E.K.C. (Electronic Key Counter) Function Setting (continued) [2] E.K.C. All Count Reset Reset the count for all EKC accounts. EKC Setting Menu Screen EKC All Count Reset Screen Procedure 1 Touch [4] E.K.C. function setting on the Key Operator Mode Screen. Enter an 8-digit EKC master key code, then touch OK to display the EKC Setting Menu Screen.
Page 325: Function Setting
[4] E.K.C. (Electronic Key Counter) Function Setting (continued) [3] E.K.C. Function Setting Use this function to turn EKC On or Off, or to select whether the machine will stop when the count limit is reached, or if the copier will complete the copy job before stopping when reaching maximum copy count.
Page 326: Lock/Delete Job Memory
7155e132v1.fm 22 ページ２００１年１１月２７日　火曜日　午後４時５８分 [5] Lock/Delete Job Memory Use this function to lock/unlock or delete a Job that has been programmed. A locked Job is indicated by a lock icon ( ) on the Lock/Delete Job Memory Screen. The settings of a locked job cannot be changed. ❒...
Page 327: Paper Type / Special Size Set
[6] Paper Type / Special Size Set Use this function to indicate a speciﬁc paper type or to specify a special paper size for each tray key on the Basic Screen. This is especially useful when special paper is used on a regular basis and is always placed in a speciﬁc paper tray.
Page 328 7155e132v1.fm 24 ページ２００１年１１月２７日　火曜日　午後４時５８分 [6] Paper Type / Special Size Set (continued) To specify special size; (1) Touch Special size setting on the Paper Type Setting Screen to display the Special Size Setting Screen. (2) Touch the desired paper tray to highlight it. (3) Touch a paper size key to specify a paper size for the selected tray.
Page 329: Panel Contrast / Key Sound Adjustment
[7] Panel Contrast / Key Sound Adjustment Use this feature to adjust the level of brightness of the touch screen portion of the control panel, and also the volume of the touch key. Key Operator Mode Screen Panel Contrast/ Key Sound Adjustment Screen Key Operator Mode System Initial...
Page 330: Key Operator Data Setting
7155e132v1.fm 26 ページ２００１年１１月２７日　火曜日　午後４時５８分 [8] Key Operator Data Setting Use this screen to enter the name and extension number of the Key Opera- tor indicated on the Help Screen selected from the Basic Screen. ❒ Setting options: 5-digit Key Operator telephone extension; Max. 8-character Key Operator name Key Operator Mode Screen Key Operator Data Setting Screen...
Page 331: Section 13: Key Operator Mode (Continued)
[9] Weekly Timer This function can be accessed only by the Key Operator after a unique 4- digit Weekly Timer master key code is entered. The Weekly Timer is a copier management function that shuts down power to the machine on a daily or hourly basis, and can be programmed speciﬁcally for lunch breaks, weekends and holidays, or any time the copier is not required.
Page 332: How To Access The Weekly Timer Setting Mode
7155e132v1.fm 28 ページ２００１年１１月２７日　火曜日　午後４時５８分 [9] Weekly Timer (continued) How to Access the Weekly Timer Setting Mode Key Operator Mode Screen Weekly Timer Master Key Code Screen Weekly Timer Setting Menu Screen Procedure 1 Touch [9] Weekly timer on the Key Operator Mode Screen. The Weekly Timer Master Key Code Screen displays when the 4-digit Weekly Timer master key code is set by service.
Page 333: Weekly Timer On/Off Setting
[9] Weekly Timer (continued) [1] Weekly Timer On/Off Setting Weekly Timer Setting Menu Screen Weekly Timer On/Off Setting Screen Key Operator Procedure Mode System Initial 1 Touch [9] Weekly timer on the Key Operator Mode Screen. Enter your 4-digit Setting Weekly Timer master key code, then touch OK to display the Weekly Timer Copier Initial Setting Menu Screen.
Page 334: Timer Setting
7155e132v1.fm 30 ページ２００１年１１月２７日　火曜日　午後４時５８分 [9] Weekly Timer (continued) [2] Timer Setting Use this function to set the On/Off times in hours and minutes for each day of the week or set the block time for the entire week, i.e., the same On/Off time for each day.
Page 335 [9] Weekly Timer (continued) 5 When you open this screen, the ON and OFF times are always set at 00:00~00:00. Touch to highlight the day(s) of the week to be set. More than one can be selected at a time. Enter the ON-time and OFF-time using the touch screen keypad, and then touch SET after each entry.
Page 336: Timer Action On/Off Setting
7155e132v1.fm 32 ページ２００１年１１月２７日　火曜日　午後４時５８分 [9] Weekly Timer (continued) [3] Timer Action On/Off Setting Use this function to set the On/Off condition of the copier for a given month. Set the On-Off condition for speciﬁc days; or collectively, for all Mondays through Sundays of the given month.
Page 337 [9] Weekly Timer (continued) 6 Touch OK on the Timer Action On/Off Setting Screen to complete the setting and return to the Weekly Timer Setting Menu Screen. 7 Touch RETURN to restore the Key Operator Mode Screen. 8 If no further changes are required, touch RETURN to restore the Basic Screen to perform copying operations.
Page 338: Lunch Hour Off Setting
7155e132v1.fm 34 ページ２００１年１１月２７日　火曜日　午後４時５８分 [9] Weekly Timer (continued) [4] Lunch Hour Off Setting The Weekly Timer function turns the copier ON and OFF once a day. Use this Lunch hour off function to shut down power for lunch break then turn on again while the copier is turned on due to the Weekly Timer function.
Page 339: Timer Interrupt Password Setting
[9] Weekly Timer (continued) [5] Timer Interrupt Password Setting Use this password setting mode to establish a 4-digit password requirement for using Timer Interrupt function. The default password of 0000 allows the timer function to be interrupted without the requirement for password entry. Weekly Timer Setting Menu Screen Timer Interrupt Password Setting Screen Key Operator...
Page 340: Control Panel Adjustment
7155e133v1.fm 36 ページ２００１年１１月２８日　水曜日　午前１１時５３分 [10] Control Panel Adjustment Use this feature to check the malfunction of the LCD touch screen due to the shift in position of the touch sensor. Key Operator Mode Screen Control Panel Adjustment Screen Procedure 1 Touch [10] Control panel adjustment on the Key Operator Mode Screen to display the Control Panel Adjustment Screen.
Page 341: Tray Auto Select Setting
[11] Tray Auto Select Setting Select to be detected or not to be detected, and priority of detection for each tray when ATS/APS functions. Key Operator Mode Screen 1 Key Operator Mode Screen 2 Key Operator Mode System Initial Tray Auto Select Setting Screen Setting Copier Initial Setting...
Page 342: Power Save Setting
7155e133v1.fm 38 ページ２００１年１１月２８日　水曜日　午前１１時５３分 [12] Power Save Setting Select the interval of time that must elapse before Auto Low Power and Auto Shut Off become activated. Auto Shut Off conserves more energy than Auto Low Power. The period of time selected for Auto Low Power cannot exceed the Auto Shut Off setting.
Page 343: Memory Switch Setting
[13] Memory Switch Setting This function allows you to change the Memory Settings listed below. See pp. 13- 41~13-45 for details on Memory Settings. SW No. Item Setting (default is underlined) No. 01: Auto reset timer OFF / 30 sec. / 60 sec. / 90 sec. / 120 sec./ 150 sec.
Page 344 7155e133v1.fm 40 ページ２００１年１１月２８日　水曜日　午前１１時５３分 [13] Memory Switch Setting (continued) No. 26: STOP key function JOB momentary stop / JOB cancel No. 27: Auto select of Booklet copy Automatic selection / Non Automatic selection No. 28: E.K.C. password under 8 digits / 8 digits No.
Page 345 [13] Memory Switch Setting (continued) 2 Use the procedure below to select the desired item and change the setting. (1) Touch the arrow keys ▲ and ▼ at the right on the Memory Switch Setting Screen to select the desired item. (2) Touch the arrow keys c and d at the lower left to scroll the screen.
Page 346 7155e133v1.fm 42 ページ２００１年１１月２８日　水曜日　午前１１時５３分 [13] Memory Switch Setting (continued) [9] Automatic tray switching When paper is depleted during a copying job, the copier continues copying by switching to another tray that contains the same size paper. [10] Platen APS The copier automatically selects the same size copy paper as the original placed on the platen glass.
Page 347 [13] Memory Switch Setting (continued) [20] Job offset operating Set the copier to offset the copies of different jobs when outputting multiple reserve jobs in succession. [21] Continuation print Set the copier to output multiple reserve jobs in succession. [22] Key click sound Activate or deactivate the sound each time a key is pressed on the touch panel .
Page 348 7155e133v1.fm 44 ページ２００１年１１月２８日　水曜日　午前１１時５３分 [13] Memory Switch Setting (continued) [32] E.K.C. password input timing Set the input timing for the EKC password. [33] Key click sound (No paper/JAM) Select the duration of the buzzer for alerting that the machine has stopped being out of paper or due to paper misfeed.
Page 349 [13] Memory Switch Setting (continued) [42] Image stored cont. (SRV) When storing the image data in HDD/PC in scanner/server mode, select to release or continue the scanner/server mode after completion of each image data storing job. [43] Image recalled cont. (SRV) When recalling the image data stored in HDD/PC in scanner/server mode, select to recall only one job or to continue recalling jobs.
Page 350: Machine Management List Print
7155e133v1.fm 46 ページ２００１年１１月２８日　水曜日　午前１１時５３分 [14] Machine Management List Print Use this function to print out the list selected from the following items. • Job memory list: Programmed contents of Job memory • User management list: Home position settings selected by user •...
Page 351: Call Remote Centre
[15] Call Remote Centre When activated, the Remote Diagnostics option is automatically monitored by a Konica service representative. In case of machine trouble, select the Call Remote Centre option. Your service representative will contact you to determine the appropriate means for resolving the problem.
Page 352: Side 2 Lens Adjustment
7155e133v1.fm 48 ページ２００１年１１月２８日　水曜日　午前１１時５３分 [16] Side 2 Lens Adjustment Use this function to set the adjustment data of the magniﬁcation ratio for each tray as Side 2. Key Operator Mode Screen Side 2 Lens Adjustment Screen Procedure 1 Touch [16] Side 2 lens adjustment on the Key Operator Mode Screen to display the Side 2 Lens Adjustment Screen.
Page 353: Finisher Adjustment
[17] Finisher Adjustment Use this mode to make ﬁne adjustments to each function of the ﬁnisher. Key Operator Mode Screen Finisher Adjustment Menu Screen Key Operator Mode Stitch&Fold Stopper Position Adjustment Screen Fold Stopper Position Adjustment Screen System Initial Setting Copier Initial Setting User Setting...
Page 354: Hdd Management Setting
7155e133v1.fm 50 ページ２００１年１１月２８日　水曜日　午前１１時５３分 [18] HDD Management Setting Use this function to manage the image data stored in the optional HDD (HD-105) and to check the space available for new data. • Password list/delete: Display the password list on the screen, or delete the image data (JOB) by deleting the corresponding password from the list.
Page 355: Non-Image Area Erase
[18] HDD Management Setting (continued) Procedure 1 Touch [18] HDD management setting on the Key Operator Mode Screen. The HDD Management Password Entry Screen will be displayed when the 4-digit HDD management password is set by service representative. Otherwise, the HDD Management Setting Menu Screen displays without the password requirement.
Page 356: Scan Transmission Setting
7155e133v1.fm 52 ページ２００１年１１月２８日　水曜日　午前１１時５３分 [19] Scan Transmission Setting Use this function to change or delete the address registered for transmitting the image data scanned on the machine. The following three address types can be registered. • E-mail • HDD (box No.) •...
Page 357 [19] Scan Transmission Setting (continued) To delete the address: Touch to highlight the desired name key, then touch DELETE. The selected key will be deleted from the screen. To change the address: (1) Touch to highlight the desired name key, then touch CHANGE. The subsequent screen according to the address type will be displayed.
Page 358: Non-Image Area Erase Setting
7155e133v1.fm 54 ページ２００１年１１月２８日　水曜日　午前１１時５３分 [20] Non-Image Area Erase Setting Select the mode of Non-Image Area Erase function to be in effect when this feature is selected on the Application Selection Screen after power is turned on or after Auto Reset occurs. Key Operator Mode Screen Non-Image Area Erase Setting Screen Procedure...
Page 359 Index...
Page 360 7155eindexv1.fm 0 ページ２００１年１１月２８日　水曜日　午後１２時０分...
Page 361 7155eindexv1.fm i ページ２００１年１１月２８日　水曜日　午後１２時０分 Index Number Change page no. pos. (booklet) 13-44 Changing Paper Size 2-29 1 SHOT indication time 13-43 Chapter 9-7 1.00 Magniﬁcation mode 3-14 CHECK key 3-51 1-2 Copying 3-21 Check Mode 3-51 1 s 2, 2 s 2 3-21 Checking Copy Count 12-12 2 in 1, 4 in 1, 8 in 1 copying 9-10 Cleaning image scanning section 12-10...
Page 362 7155eindexv1.fm ii ページ２００１年１１月２８日　水曜日　午後１２時０分 Index JOB MEMORY key 4-2 Job memory list 13-46 Finisher Adjustment 13-49 Job offset operating 13-43 Finisher door 2-6 Job Recall 4-5 Finisher mode by AUTO RESET 13-41 Job Status Screen 3-37 Fixed magniﬁcation mode (RE) 3-15 Job Store 4-2 Fixing unit 2-4 Fold mode 7-9...
Page 363 7155eindexv1.fm iii ページ２００１年１１月２８日　水曜日　午後１２時０分 Index POWER SAVER ON/OFF key 2-16, 7-2 Power Source 1-5 Non-Image Area Erase 9-29 Power switch 2-3 Non-Image Area Erase Setting 13-54 Precautions 1-8 Non-standard size original 8-10 PRE-JOB RECALL key 3-50 NORMAL key 3-18 Preventive Maintenance 5-4 Previous job setting 3-50 Primary (main) tray 2-6 OHP Interleave 9-17...
Page 364 7155eindexv1.fm iv ページ２００１年１１月２８日　水曜日　午後１２時０分 Index Staple cartridge 12-6 Staple mode reset function 13-42 Wake-up Screen 2-13 Stitch & Fold mode 7-9 Warm-up Screen 2-14, 3-7 START key latch function 13-43 WARNING 1-4 STATUS key 3-37 Waste basket 2-7 STOP key 3-9 Watermark 9-58 STOP key function 13-43 Weekly Timer 7-2, 13-27...
Page 366 194900...

This manual is also suitable for:

7155

Konica Minolta 7165 Instruction Manual

3 Basic

Machine Information

Machine

Information

Paper

Copying Operations

P Ositioning Originals

S Etting Job During Warm-Up

S Electing Paper Size

S Electing Density Level

Making Single-Sided Copy from Double-Sided Originals (2S1)

C Opying Using Memory

O Utput Mode for Machine with Finisher

R Ecalling Previous Job Settings

I Nterrupt Copying

Job Memory

Help Mode

Troubleshooting 5

W Hen "Call for Service" Message Is Displayed

P Reventive Maintenance

C Learing Mishandled Paper

W Hen "JAM" Appears on "SCAN" or "PRINT" Key

W Hen "ADD PAPER" Appears on "PRINT" Key

W Hen "Memory Full" Message Is Displayed (Memory Overﬂow)

W Hen Power OFF/ON Screen Is Displayed

T Roubleshooting Tips

Machine Specifications

A Dvanced Information

Section 7: Advanced Information

Advanced Information

P Rogrammed Shut-Off (Weekly Timer)

Vertical/Horizontal Zoom Mode

P Unching File Holes in Copies (Punch)

C over Sheet Feeding

U Sing Two Copiers in Tandem

Special Original

S Pecifying Original Direction

M Aking Copy Quality Closer to Originals (Text/Photo Enhance)

C Opying Mixed Size Originals (Mixed Original)

Copying Z-Folded Originals (Z-Folded Original)

C Opying Non-Standard Size Originals (Original Form)

Applications

T O Display Application Selection Screen

L Ocating Title Pages on the Right Side (Chapter)

M Aking a Multiple Page Signature Booklet (Booklet)

I Nserting Images into Printed Sets (Image Insert)

P Rogramming Different Settings for an Output Job (Program Job)

R Eversing Colour in Black and White Image (Reverse Image)

R Epeating Automatically or Selecting Repeating Times

C Opying Image in the Centre of Copy Paper (AUTO Layout)

A Djusting Position of Copy Image (Image Shift)

P Rinting Stamp, Page, Date/Time Onto Copies (Stamp)

O Verlaying an Image Onto each Page Copied in the Job (Overlay)

Stored in HDD (Overlay Memory)

10 Server Function

T O Use Server Functions

S Toring Image Data While Copying (Image Store&Output)

E Diting Image Data Using PC (Image Edit)

Original Info

12 Maintenance & Supplies

Key Operator

H Ow to Access the Key Operator Mode

S Ystem Initial Setting

C Opier Initial Setting

Electronic Key Counter) Function Setting

P Aper Type / Special Size Set

K Ey Operator Data Setting

Section 13: Key Operator Mode (Continued)

C Ontrol Panel Adjustment

Job Memory

P Ower Save Setting

M Achine Management List Print

S Ide 2 Lens Adjustment

HDD Management Setting

N On-Image Area Erase Setting

Quick Links

Chapters

Troubleshooting

Related Manuals for Konica Minolta 7165