Konica Minolta 7165 Instruction Manual page 244

7155e093v1.fm 56 ページ ２００１年１１月２７日 火曜日 午後４時２３分
Printing Stamp, Page, Date/Time onto Copies (Stamp) (continued)
CAUTION
When the finisher / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
FOR DETAILS: Fine Adjustment Setting Screen
When FINE ADJ. OF POSITION is touched, the Fine Adjustment Set-
ting Screen will be displayed.
Touch UP SIDE , DOWN SIDE , RIGHT SIDE , or LEFT SIDE to specify
the direction, then use the touch screen keypad or up/down arrow key to
enter the desired amount, from 0 to 50mm.
Touch OK to return to the previous screen.
Starting No. Setting Screen: Available from SET NUMBERING or WATER-
MARK NUMBERING
Use the touch screen keypad or up/down arrow key to enter the desired
starting number, then touch OK to return to the previous screen.
Starting No. Setting Screen: Available from PAGE NUMBERING
When Chapter is already selected, the chapter starting number can also
be specified on the Starting No. Setting Screen.
Touch PAGE NUMBER or CHAPTER NUMBER to highlight it, then use
the touch screen keypad or up/down arrow key to enter the desired
starting number for each.
9-56