Konica Minolta 7165 Instruction Manual page 250

7155e093v1.fm 62 ページ ２００１年１１月２７日 火曜日 午後４時２３分
Overlaying an Image onto Each Page Copied in the Job (Overlay) (continued)
3.
Touch OVERLAY .
4.
Touch OK on the Stamp/Overlay Selection Screen.
The Application Selection Screen will be restored.
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
The Store mode is automatically selected.
6.
Select the desired paper size and magnification on the Basic
Screen.
APS and AMS are automatically released, and 1.00 (100%) is selected as a
magnification ratio.
7.
Enter the desired print quantity from the control panel keypad.
8.
Position the overlaying original.
Position the original FACE UP in the document feeder or FACE DOWN on the
platen glass.
9.
Press [ START ] to scan.
The original image will be scanned into memory.
10.
Position the original(s) to be overlaid.
Position the original FACE UP in the document feeder or FACE DOWN on the
platen glass.
9-62
HINT
See p. 3-6 for details on setting print quantity.
HINT
For details on positioning originals, see p. 3-2 to p. 3-5.